High durability powder coatings MT-810 AM
Product Description
MT-810 AM is a series of high durability powder coatings, formulated without TGIC, designed for exterior exposure. Tested against the most severe specifications MT-810 gives significantly improved gloss retention and resistance to colour change. MT-810 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements. MT-810 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Additionally MT-810 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder properties
| Chemical Type | Polyester TGIC-free |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
| Stoving Schedule
(object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
| Adhesion
(2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
| Impact | BS6496 | Depends on shade |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
4-Vinylbenzyl chloride CAS No.1592-20-7;30030-25-2 | 1592-20-7 –Names and Identifiers Name 1-(Chloromethyl)-4-Ethenylbenzene Synonyms 4-Vinylbenzylchloride4-Chloromethyl styrene4-V... |
|
|
Lighting powder coatings | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Automotive Components Powder Coatings MT-A200 Series | Product Overview: Epoxy polyester powder coating series designed for automobile engine blocks, suspension systems, filters, springs and other part... |
 |
Neutralizing corrosion inhibitor STD-8 | Neutralizing corrosion inhibitor STD-8 (for ethylene plant) has the dual functions of neutralization and film formation. It can not only neutralize... |
 |
Yellow Series Powder Coating | Introduction We are a China-based manufacturer specializing in the export of yellow series powder coatings for industrial, commercial, and OEM app... |
