Acrylic transparent powder coating
Product description
This series of products is made of acrylic resin and hardener to produce transparent powder coating with high transparency and excellent leveling properties.
Product features
- Excellent gloss and vividness, the coating is crystal clear;
- Excellent fluidity, the coating surface is smooth as a mirror;
- Excellent weather resistance in harsh outdoor environments, maintaining the original color of the coating;
- Good surface hardness and strong scratch resistance.
Application areas
1. Designed for automotive aluminum wheel surface finishing, and suitable as a high-performance finishing coating for various appliances, such as furniture metal tripods, bicycles, and door handles;
2. Suitable as a finishing protective layer for metal powder coatings.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.0~1.5g/cm |
| Particle size | Depending on the application |
| Storage stability | Acrylic transparent powder coating should be stored in a dry, ventilated room below 25℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same temperature as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
N-methylpyrrolidone | STD N-methylpyrrolidone, also known as 1-methyl 2-pyrrolidone, referred to as NMP, is a polar aprotic solvent with high boiling point, strong polar... |
 |
Anti-Corrosion Powder Coating for Drinking Water Pipes | Product Introduction: This product is formulated using special epoxy resins, dedicated curing agents, and food-grade pigments and fillers. It feat... |
|
|
Garden powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
 |
Plaza powder coating | Introduction Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical pro... |
 |
Automobile spring powder coating | Brief description: Made of saturated polyester resin, epoxy resin or epoxy polyester mixed type as base material. Features: Excellent physical... |
