Standard Building Materials Powder Coating
Introduction：
Polyester resin and TGIC curing agent as the main raw materials.
Coating characteristics:
Good adhesion, excellent mechanical properties, tough coating film.
Smooth and smooth film
Good Outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for various outdoor products such as:outdoor lighting, beach chair, solar water heater,
outdoor air conditioning unit, aluminum curtain wall,door and window frame, ceiling, highway guardrail,fence, sports facilities, communication equipment,etc
Application parameters:
Curing time
200°Cx10–15 mins
Recommended filmthickness:
60-80 um
Spraying method:
high voltage electrostatic sprayin60-80KV
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance. commitment of the product application.
The results vary with environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
MT-A600 Series Powder Coating | Product Overview The Surpass MT-A600 Series powder coating is a high-performance coating designed specifically for computer cases, including deskt... |
 |
Polyester resin based thermo-setting powder coatings MT-300 AM | Product Description MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the ... |
 |
Electrical Insulation Powder Coatings | Feature: Granularity 100~200μm>=70% 260μm<=0.5% External appearance flat and smooth, slight orange peel is allow... |
 |
Polyester based powder coating MT-MA010G White | Product Description MT-MA010G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
Sand grain metal MT-049/77578 | Introduction No. MT-049/77578 Color Xuanyou (grey) Surface Sand grain metal System Polyester Scope of applicatio... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
