Powder coating for automobile springs
Product description
Powder coating for automobile springs is outdoor pure polyester powder coating with excellent weather resistance and mechanical properties, excellent flexibility and cold resistance.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Application areas
Applicable to automobile springs and devices with high mechanical performance requirements.
Health and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Coating uniform, no burrs, bubbles and other defects |
| Film thickness | GB/T 1764 | ≥60 μm |
| Adhesion | GB/T 9286 | Level 0 or Level 1 |
| Impact | GB/T 1732 | ≥50Kg*cm |
| Neutral salt spray resistance | GB/T 1771 | 480h; Stroke area: unidirectional rust ≤2.0mm; Unstrike area: no abnormality |
| Water resistance | QCIT 484 | 240h No abnormality |
| Oil resistance | HG/T 3343 | 48h No abnormality |
| Gasoline resistance | GB/T 1734 | 8h No abnormality |
| Acid resistance | GB/T 9274 | 24h; No fuzziness, no spots, slight discoloration allowed |
| Alkali resistance | GB/T 9274 | 4h; No fuzziness, slight discoloration allowed |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Curing conditions | 200℃/15min | |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
|
|
Metallic sand texture matte MT-049/83099 | Introduction No. MT-049/83099 Color Black Surface Metallic sand texture matte System Polyester Scope of applicat... |
 |
Polyester based powder coating MT-OA110G | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
3,3′,4,4′-Benzophenonetetracarboxylic dianhydride CAS 2421-28-5 | Physico-chemical Properties Molecular Formula C17H6O7 Molar Mass 322.23 Density 1.662g/cm3 Melting Point 219-226℃ ... |
|
|
Powder coating for construction machinery | Introduction Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
|
|
Epoxy powder coatings MT-100 | Product description MT-100 is a series epoxy based powder coatings that exhibit excellent corrosion protection and chemical resistance when applie... |
