Antimicrobial Powder Coatings

Introduction

Made of inorganic antibacterial agent, with long-term antibacterial properties, suitable for indoor and outdoorenvironment Properties: – Prevent the breeding of Escherichia coli, aflatoxin, Gambococcus, Penicilliumcitrullus, Bacillus citrullus, trichoderma, dermatophyllus, rhodococcus.

PRODUCT FEATURES

Product performance:

long term Up to 4N- 5N

(99.99-99 .999%)

Application:

kitchen utensils: dishwasher, stove, cupboard, etc

Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc

Medical equipment: medical beds, etc

Spraying method:

high voltage electrostatic sprayin 60-80KV

Recommended film thickness:

60-80 um

Application parameters

Curing time

200°Cx10–15mins

STANDARD TEST METHOD FOR ITEMIZER

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.

The results vary with environmental factors and other conditions.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Polyethylene (PE) Powder Coatings	Introduction We provide a complete range of Polyethylene (PE) Powder Coatings, manufactured in China and shipped globally to serve B2B clients acr...
	1-(4-CHLOROPHENYL)-3-HYDROXY-1H-PYRAZOLE	CAS Number: 76205-19-1. Molecular Formula: C9H7ClN2O. Molecular Weight: 194.62 g/mol. Appearance: Yellow to brown powder or white crystalline po...
	Polyester Powder Coating	Product Introduction:This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding curi...
	Bronze Gold Hammer Texture Powder Coating	Product Description iteminformation Method Spray Certification RoHS, ISO9001. Reach, FDA, En71 Thickness 60-80 (μm) ...
	Sand-Textured Wood Grain Powder	Introduction Sand-textured wood grain powder is a specialized powder coating designed to replicate the natural texture and appearance of wood whil...

Same products

	Trimellitic anhydride 97%	Seller: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	Seller: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	Seller: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	Seller: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	Seller: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...