Polyester based powder coating MT-JA000G White
Product Description
MT-JA000G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish. MT-JA000G is part of the MT range of powder coatings with high total reflectance, designed specifically for the lighting market.
Powder Properties
| Chemical type | Polyester TGIC |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.74 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 7.7m2/kg @ 75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
15 minutes at 200°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron Phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 15 minutes at 180°C |
Mechanical Tests
| test | results | |
| Flexibility | ASTM D522 | 3mm |
| Adhesion | ASTM D3359 | 100% |
| Impact (dir/rev) | ASTM D2794 | 100/100kgcm |
| Gloss(@60°） | ISO 2813 | 85±5% |
| Hardness (scratch) | ASTM D3363 | H |
| Reflectance Class | DIN EN 16268 | A+ |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-JA000G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-JA000G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Electronic and Electrical Powder Coating | Introduction We are a trusted Chinese powder coating manufacturer with over 20 years of export experience, delivering premium coatings to electric... |
 |
Soft Starry Grey powder coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Yellow High-gloss Powder Coating | High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance performance: high glo... |
 |
Pure epoxy powder coating series | Introduction: Made of epoxy resin and curing agent as the main raw materials. Features: —Good adhesion, excellent mechanical properties su... |
 |
Thermoplastic Fluoropolymer Powder Coating | 1. Why Choose Fluoropolymer Powder Coatings? Outstanding UV and Weather Resistance: Ideal for outdoor and long-term applications Excellent Chemic... |
