Polyurethane powder coating series
Made of hydroxy polyester resin and isocyanate curing agent as the main raw materials.
Features:
–Good adhesion, good mechanical properties
—Full and smooth coating, high hardness
—Excellent weather resistance
—Excellent chemical resistance
Application:
Suitable for decoration and protection of a variety of outdoor products: such as household appliances, architectural aluminum profiles, transportation facilities, garden facilities, etc.
Product series:
—Can be made into a variety of gloss and colorful colors, the specific gloss color is subject to user requirements
Application parameters:
Curing time: 200℃×10–15 minutes
Spraying method: High-voltage electrostatic spraying 60-80 KV
Recommended film thickness: 60-80 um
| Performance Category | Performance Parameter | Possible Specification | Test Method |
|---|---|---|---|
| Physical Properties | Pencil Hardness | 1H – 3H | ASTM D3363 |
| Impact Resistance | ≥50 kg·cm | GB/T 1732 | |
| Flexibility | ≤2mm | GB/T 6742 | |
| Adhesion | 0 – 2 grade | ISO 2409 | |
| Cupping Depth | ≥6 mm (or ≥7 mm in some cases) | GB/T 9753 | |
| Gloss Level | Adjustable (matte, semi-gloss, high-gloss) | – | |
| Particle Size Distribution | Average particle size: 34-45μm; <15μm: <7.5%; >85μm: <0.5% | – | |
| Chemical Properties | Salt Spray Resistance | ≥500 hours, ≥Grade 9 | GB/T 1771 |
| Humidity Resistance | ≥1000 hours, slight loss of gloss | GB/T 1740 | |
| Weather Resistance (QUV-B313) | ≥240h (some products may last longer) | GB/T 1865 | |
| Chemical Resistance (5% H₂SO₄) | 240 hours, no change | – | |
| Chemical Resistance (5% NaOH) | 168 hours, slight loss of light | – | |
| Environmental Compliance | RoHS Compliance | Free from arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, and other heavy non-ferrous metals | RoHS Directive |
The above tests all use 0.8mm degreased and rusted cold-rolled steel plates, the coating thickness is 60-80um, and the performance indicators of the coating will vary slightly with the gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, and other heavy metals, and complies with RoHS requirements.
Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it exceeds the expiration date, it can be re-tested. If the results meet the requirements, it can still be used.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Polyethylene (PE) Powder Coatings | Introduction We provide a complete range of Polyethylene (PE) Powder Coatings, manufactured in China and shipped globally to serve B2B clients acr... |
 |
Powder coating for aluminum profiles | Product description This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and i... |
 |
Outdoor quality-warranty weather-resistant wooden transfer powder coating | Introduction Standard transfer water-grain primer uses imported weather-resistant polyurethane PU system, which has the advantages of high lev... |
 |
Polyamide Powder Coating for Transportation | Why Choose Nylon Powder Coatings? Outstanding Abrasion and Impact Resistance Excellent Chemical and Corrosion Resistance Smooth, Dense, and Flex... |
 |
Powder coating primer | Product Description MT-Active is a powder coating primer, totally free from Zinc. It is designed to give enhanced corrosion protection of mild ste... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
