Epoxy-polyester powder coating MT-APA EL286A/MT- EL286A
Product Description
MT-APA is an epoxy-polyester powder coating primer especially designed for direct application on substrates that are sensitive to out-gassing, such as Hot Dip Galvanized steel, Metal spraying, Zamak, Cast steel, Aluminium, brass etc. MT-APA offers excellent flow, chemical and salt spray resistance, and resistance to mechanical damage. MT-APA is suitable for use as a primer for a variety of liquid topcoats, however it is recommended that pre-qualification tests for intercoat adhesion be carried out prior to use
Powder Properties
| Appearance | Smooth |
| Chemical type | Epoxy-Polyester |
| Color | Grey |
| Recommended Film Thickness (µm) | 50 – 80 µm |
| Density (g/cm3) | 1.68 ± 0.03 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 25°C) conditions |
| Shelf life | 24 months below 25ºC |
Pretreatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT-APA. The pre-treatment should be used in accordance with the supplier’s recommendations.
a) Aluminium Multistage chrome chromate or chrome phosphate
b) Galvanised Steel Multistage zinc phosphate or chromate
c) Steel Multistage zinc or iron phosphate
Application
MT-APA is suitable for corona electrostatic spraying. Tribo application is not recommended.
| Recommended film thickness | 50-80 µm, good protection is linked with the recommended film thickness. |
| Recycling | Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used. |
Note: Failure to comply with the recommended curing conditions may affect the adhesion of the topcoat and cause degradation of the system performance properties. Parts coated with MT-APA should not be handled if possible. If handling is unavoidable, clean lint-free gloves must be worn.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Powder coatings for automobile bodies MT-A500 series | Product overview: Weather-resistant pure polyester powder coatings designed for automobile bodies. Use:Suitable for spraying of body parts of var... |
 |
Sky Blue Powder Coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Outdoor Powder Coating | Product introduction Resistant to sunlight, rain and dew, and good heat resistance; Good adhesion to metal substrates; The coating surface can b... |
 |
Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes | Surface Finish Options Overview Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed con... |
 |
PTFE Coatings | We specialize in supplying high-quality Polyvinylidene Fluoride (PVDF) powder coatings directly from our China-based factories. Designed for global... |
Same products
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
