Medical device friction powder
Introduction
Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry’s requirements for powder coatings. We select materials for different industries and make corresponding adjustments to the process to better match the industry’s requirements. We provide customers with high-quality and low-cost products that are easy to use.
| Product name |
Medical device friction powder |
| Applicable industries |
Medical device |
| Powder specific gravity |
1.2-1.8ɡ/cm³ |
| Product features |
- Uniform film thickness, no fat edge, high gloss, good leveling.
- Antibacterial powder can be made according to customer requirements.
|
| Physical properties |
Bending |
ASTM D522 |
Passed-curvature diameter is 5mm |
| GB/T1731 |
Passed-curvature diameter is 2mm |
| Dry adhesion |
ASTM D3359 |
Passed-result is 5B |
| ISO 2409 |
Passed-result is 0 grade |
| GB/T9286 |
Passed-result is 0 grade |
| Cupping |
ISO 1520 |
Pass 5mm-No cracking or shedding of coating |
| GB/T9753 |
Pass 5mm-No cracking or shedding of coating |
| Impact resistance (positive impact) |
ASTM D2794 |
≥50kg.cm |
| GB/T9753 |
50kg.cm |
| Pencil hardness (scratch hardness) |
ASTM D3363 |
≥H |
| GB/T6739 |
≥H |
| Storage stability |
12 months (less than 30℃ environment) Re-test after expiration. If it meets the requirements, it can be used at will. |
| Curing process |
200℃/12min, 180℃/15min (workpiece surface temperature). |
| Pretreatment |
All metal substrates need to be degreased and degreased. Iron-based metals are treated with zinc or iron phosphating and aluminum chroming to improve corrosion resistance. |
| Coating |
- Manual or automatic spraying equipment can be used. To ensure the consistency of the coating, automatic spraying equipment is recommended.
- Unsprayed powder can be recycled through an appropriate recycling system.
- Atomizing air pressure ∽0.5 bar.Primary air ∽0.6 bar.
|
| Damage repair |
Surface treatment: Grinding + air cleaning.
Application: Recoating mode,reduce spraying voltage.
|
| Safety Warning |
- When spraying, do not eat, drink or smoke, and avoid inhalation of dust.
- Wear a suitable breathing mask.
- For more information, please ask the salesperson for the material safety data sheet of the specific product for reference.
|
| Disclaimer |
Important note: The information provided in this table cannot be comprehensive and is based on current laws and current knowledge. Anyone who intends to use the product in areas other than those recommended in this table without first obtaining written confirmation from us of the product’s suitability will bear the consequences. It is the user’s unshirkable responsibility to take necessary measures to meet local legal and regulatory requirements. Please continue to read the material safety data sheet and technical parameter sheet of our products when you have time. We try our best to ensure that all the instructions for our products (in or outside the table) are correct, but we cannot fully control the quality or condition of the substrate and the many factors that may affect the use of the product. Therefore, unless we specifically confirm in writing, we do not assume any responsibility for loss of product performance and any other loss or damage caused by the use of the product. All products and technical recommendations we provide are subject to our standard terms and conditions of sale. Please obtain a copy of this document and read it carefully. The content of this table will be supplemented and improved as we accumulate experience and update policies. Before using the product, the user should verify whether the data in this table is the latest. |
Other supplier products
All supplier products
Same products
|
|
Easy-cleaning Silicone-Modified Waterborne UV Resin |
Seller: Guangzhou Human New Material Science and Technology Co., Ltd |
LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
|
|
Water-based Soft-Touch Resin for Consumer Electronics |
Seller: Guangzhou Human New Material Science and Technology Co., Ltd |
Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
|
|
Conformal Coatings |
Seller: Guangzhou Human New Material Science and Technology Co., Ltd |
The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
|
|
Metalized & Laser Transfer coating |
Seller: Guangzhou Human New Material Science and Technology Co., Ltd |
Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
|
|
Hydrophilic coatings for Air Conditioner |
Seller: Guangzhou Human New Material Science and Technology Co., Ltd |
A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
