High Reflectivity (Infrared Camouflage Cooling) Powder Series
Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.
Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.
Surfaces can reduce energy absorption through radiation
Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.
Thermal relief through smart surface technology
IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.
The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.
The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.
Key Features & Specifications
| Feature | Specification / Benefit |
|---|---|
| Reflective Cooling Effect | Reflects >90% of solar infrared radiation (800–2500 nm), reducing heat absorption. |
| Temperature Regulation | Maintains internal workpiece temperature≤5°C above ambientunder direct sunlight. |
| UV/Weather Resistance | Withstands1500H xenon lamp aging (ISO 4892-2)and500H salt spray (ISO 9227)for long-term outdoor durability. |
| Environmental Adaptability | Ideal for high-UV, high-heat, and high-humidity environments (e.g., deserts, coastal regions). |
Send product request
Other supplier products
 |
Metal powder coatings | IntroductionMetal powder coatings are specialized finishes designed for metal surfaces. Applied as a dry powder, they are electrostatically charged... |
 |
Metal powder coating-smooth surface powder coating | Powder coating for metal Powder coating, also known as powder painting, is a coating technique that does not require solvents and is therefore par... |
 |
Polyester based powder coating MT-JA220G White | Product Description MT-JA220G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
 |
PVF steel drum coating | PVF steel drum coating is mainly used for packaging containers of chemical pesticide products, inner walls of cans and other special anti-corrosion... |
 |
Metallic Bonding Powder Coatings | Introduction Product SegmentationApplication Fields Imitation High-Gloss Metallic Paint Series High-end aluminum profiles, elect... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Seller: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
