EP hybrid powder coating
Application areas:
Widely used in the coating of various indoor metal products.
Physical properties:
1. Specific gravity: 1.2-1.8 (depending on color and gloss)
2. Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.
3. Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.
Coating performance:
| Spraying area | 8-12 m2/Kg, film thickness 70μm (100% powder usage rate) | |
| Adhesion | GB/T 9286 | Grade 0 |
| Impact | GB/T 1732 | 50cm |
| Cupping test | GB/T 9753 | ≥ 6 mm |
| Bending test | GB/T 6742 | ≤ 3 mm |
| Pencil hardness | GB/ 6739 | ≥ H |
| Salt spray test | GB/T 1771 | 1000 h passed |
| Moisture and heat resistance | GB/T 1740 | 1000 h passed |
Application instructions:
Surface treatment: Treat according to the substrate and required performance
Spraying: Electrostatic gun or friction gun
Film thickness: 60-70 um
Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes
Hygene & Safety:
This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.
Safety & protection
All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time. Ash layer and powder particle deposition should be avoided on the surface and dead corners. Tiny organic particles will be ignited and explode under static electricity. All equipment must be grounded to prevent static electricity.
Send product request
Other supplier products
 |
Reactive Group Polyurethane Powder Coating | 1. Technical Product Classification Our acrylic coatings are categorized by chemical composition and functional performance to suit various engine... |
 |
FBE Powder Coatings | Feature: -Best corrosion resistance which can resist kinds of chemical, industry wastewater, animalcule to corrosion. -Excellentadhesion. -Outst... |
 |
Durable polyester powder coatings MT-A1000- YG001V- Red color | Product Description MT Autobody powder coating isa series of durable polyester powder coatings designed for application onto automotive components... |
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Colorful metal powder | Magic color metal powder coating This series of products is made of special materials supplemented by high-end magic color metal materials. The co... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Seller: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
