High Reflectivity (Infrared Camouflage Cooling) Powder Series

• 

Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.

Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.

Surfaces can reduce energy absorption through radiation

Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.

Thermal relief through smart surface technology

IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.

The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.

The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.

Key Features & Specifications

Applications

Outdoor Enclosures (Telecom, Power): Protects internal components from overheating in extreme climates.

Solar Equipment: Enhances efficiency by reducing thermal stress on panels/inverters.

Architectural Structures: Shields buildings/rooftops from solar heat gain, lowering cooling costs.

Advantages

Improvement of infrared reflection of over 20% depending on the color.

Reduction in surface temperature by up to 20%

Reduction of mechanical stress of metals in outdoor area

Reduction of energy costs for cooling the building

Easy handling

Environmentally friendly

Available in a large selection of RAL colors

Other supplier products

	Polyurethane primer STD-927	Product Description The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good...
	Matte powder coating	Introduction Matte powder coating is a specialized type of coating that provides a non-reflective, low-gloss finish. It is applied as a dry powder...
	Specialty Powder Coatings for the Automotive Sector	Introduction Product SegmentationApplication Fields Weather-Resistant Decorative Powder for Vehicle Exterior Whole vehicle coatings fo...
	Broad Desert Saddle Brown powder coating/spray powder coating	Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
	Polyester resin based thermo-setting powder coatings MT-300 AM	Product Description MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the ...

Same products

	High Concentration Plastic Color Masterbatch Factory Direct Supply	Seller: 861445	We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
	Acid Ink Blue G Factory	Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
	Acid Black ATT Factory	Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
	Acid Black 10B Factory	Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
	Sulphur Dyes	Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...