Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines/powder coating supplier
Product Introduction:
This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conductive heavy-duty anti-corrosion powder coatings. The surface resistivity of the coating can reach below 10⁵ Ω, effectively eliminating static electricity accumulation in gas drainage pipes and preventing static sparks, thereby enhancing safety. The coating features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.
Product Usage:
Special anti-static and anti-corrosion coating for gas ventilation and drainage pipes in coal mines.
Product Features:
- Excellent adhesion to the substrate.
- First application of a new material combining intrinsic and doped conductivity.
- Good conductivity of the coating, with surface resistivity reaching 10⁵ Ω, effectively eliminating surface charge accumulation.
- Superior high-temperature cathodic disbondment resistance.
- Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.
- Contains composite flame retardants, providing certain flame-retardant effects.
Powder Performance:
| Property | Specification | Notes |
|---|---|---|
| Adhesion | Excellent | |
| Conductivity | Surface resistivity below 10⁵ Ω | |
| Cathodic Disbondment Resistance | Superior at high temperatures | |
| Flexibility | Extremely strong, passes 4/5 flattening and post-grooving tests | |
| Temperature Resistance | Good performance in high and low temperatures | |
| Flame Retardancy | Contains composite flame retardants |
Curing Conditions:
| Property | Specification | Notes |
|---|---|---|
| Temperature | Referenced to workpiece temperature | Deviations may affect performance |
| Heating Method | Medium-frequency heating or other heating methods |
Application Parameters:
| Parameter | Specification | Notes |
|---|---|---|
| Applicable Equipment | Frictional charging spray, corona electrostatic spray, dip coating, roll coating | |
| Film Thickness | 250-450um | Adjustable according to workpiece requirements |
Health and Safety:
| Property | Specification | Notes |
|---|---|---|
| Toxicity | Non-toxic | |
| Flammability | Non-flammable | |
| Regulation | GB15607-1995 | Coating operation safety regulations |
Precautions:
| Item | Specification | Notes |
|---|---|---|
| Outdoor Use | Not recommended | May cause fading and chalking |
| Surface Preparation | Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives | |
| Preheating | Temperature controlled between 180-250°C, not exceeding 250°C | |
| Storage | Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed | |
| Curing Temperature | Preheat steel pipe surface to above 200°C for better curing completion rate |
Compliance Standards:
MT 181-88 “Safety Performance Testing Specifications for Plastic Pipes Used in Coal Mines”
Send product request
Other supplier products
 |
Container powder coating | Container Powder Coatingis an epoxy-based powder coating solution developed to enhance the durability, corrosion resistance, and service life of st... |
 |
Ral9016 White Color Powder Coating | Gloss and color Range 5%-99% and above depending on the end requirement Full color range isavailable. Feature Specific gravity 1.2-1.5g/cm3 (v... |
 |
(DPS) Dual-Layer Epoxy Anti-Corrosion Powder Coating/powder coating for engineering service providers | Product Introduction:This dual-layer epoxy powder coating system is carefully formulated using special epoxy resins and functional curing agents. T... |
 |
Profile powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t... |
 |
Coating for Busbar by Electrostatic Spray Application | Powder Properties Typical value Method Binder System Epoxy resin Density 1.75 – 1.85 g/cm³ ISO 8130-2 Gel ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
