Durable polyester powder coatings/rapid coat powder coating
Product Description
MT Autobody powder coating isa series of durable polyester powder coatings designed for application onto automotive components. Ithas been designed to display excellent protective properties including corrosion, humidity, chip resistance, acid spotting and resistance to weathering over suitably pre-treated substrates.
Powder Properties
| Chemical type | TGIC-free Polyester |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2 – 1.7 depending on colours |
| Storage | Dry cool conditions (below 30°C) |
| Shelf Life | 12 months |
| Stoving Schedule | 10 mins at 200°C |
Mechanical Tests
| Flexibility | (Bend Test) AS1580 402.1 | Pass 3mm |
| Adhesion | (2mm Crosshatch) AS1580 408.4 | Classification 1 maximum |
| Erichsen Cupping | BS3900-E4 | Pass > 3mm |
| Pencil Hardness | AS1580 405.1 | 1F – minimum |
| Reverse Impact | AS3715 Section 2.5.8 | Pass <=20InP |
Pre-treatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT Autobody. The pre-treatment should be used in accordance with the supplier’s recommendations.
A. Aluminium: Multistage chrome chromate or chrome phosphate.
B. Galvanised Steel: Multistage zinc phosphate or chromate.
C. Steel: Grit blast to SA 2.5. 20-40µm blast profile, followed by multistage zinc or iron phosphate.
Application
MT Autobody powder coatings can be applied by manual or automatic electrostatic spray equipment. Unused or over-sprayed powder coating can be reclaimed and recycled through the coating system.
Send product request
Other supplier products
 |
Polyester based powder coating MT-JA020G White | Product Description MT-JA020G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
 |
Antimicrobial and Antiviral Powder Coating | Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react... |
 |
High durability powder coatings MT-800 | Product Description MT-800 is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifica... |
 |
Garden powder coating/sand blast and powder coat | Introduction Sand-textured powder coatings are a unique type of finish that provide a distinctive, tactile surface with a granular or sandy appear... |
 |
Metallic plane MT-629/93579 | Introduction No. MT-629/93579 Color Champagne color Surface Metallic plane System Resin imported from Austria Pa... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
