Valves and pipes powder coating/powder tech
Brief description
It is mainly composed of epoxy resin and curing agent.
Features
- Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
- Good coating surface effect
- Strong corrosion resistance
- Good insulation
Application areas
Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields
Product series
Standard curing type and low temperature curing type are available
Can be made into various glosses and colors
Can be made into hot melt epoxy
Technical parameters
Powder performance
Specific gravity: 1.1~1.8g/cm³
Mechanical properties
| Test items | Test standards | Performance indicators |
|---|---|---|
| Pencil hardness | GB/T6739-1996 | >2H |
| Adhesion | GB/T9286-1998 | Grade 0 |
| Bending | GB6742-86 | Φ3mm |
| Impact | GB/T1732-93 | 50kg.cm |
| Cupping | GB9753-88 | >6mm |
Corrosion resistance
| Test items | Test standards | Performance indicators |
|---|---|---|
| Salt spray resistance | GB/T1771-91 | No change in coating after 1000 hours, unilateral corrosion at scratches <2mm |
| Moisture and heat resistance | GB/T1740-79 | Slight gloss loss after 1000 hours, ≤1 level |
Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.
Application conditions
Pretreatment: phosphating, chromating, sandblasting
Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping
Curing conditions:
200℃ at 10 minutes
180℃ at 15 minutes
Can also be designed according to customer needs
Drinking water product certification
British WRA5 standard
US NSF61 standard
German KTW/W270 standard
Drinking water valve testing standards: BS/EN14901. ANSI/NSF61
Packaging
Carton packaging, net weight 20kg/box
Lined with double-layer polyethylene plastic bags
Storage conditions
Store in a dry and ventilated room below 30℃
Avoid direct sunlight
Under this condition, the powder can be stably stored for 6 months
Safety and health
- All raw materials of powder coatings do not contain toxic substances.
- No toxic gas is released during baking.
- Avoid inhalation of dust during use.
- Operators should wear dust masks.
- Minimize long-term contact between skin and powder.
- Paint attached to the skin can be washed with soap.
Send product request
Other supplier products
 |
PVF oil pipe coating | Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi... |
 |
Metal bonding powder/powder coating sale | Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry... |
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces | Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu... |
 |
High durability powder coatings MT-800 | Product Description MT-800 is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifica... |
 |
Polyester Powder Coating Series | Made of epoxy resin and polyester resin as the main raw materials, it has excellent decorative properties, mechanical properties and good corrosion... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
