Anodized Powder Coating-powder coating with global export
It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach.
Coating characteristics:
Good adhesion, excellent mechanical properties,tough coating film.
Coating film is Smooth and glossy
Good outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc
Spraying method:
high voltage electrostatic sprayin60-80KV
Recommended filmthickness:
60-80 um
Application parameters
Curing time
200Cx10–15mins
Standard Test Method For Itemizer
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of .the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re -examined to be in good condition evenif it isfound to be expired.
Send product request
Other supplier products
| Light Gray Sand Texture Powder Coating | Introduction It is athermosetting powder coating based on epoxy polyester resin with excellent smooth glossyand good flowout finishes. Its outstan... | |
| Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... | |
| Food Grade Powder Coatings | Applications & Use Cases IndustryTypical Products/PartsBenefits of Food Grade Powder Coatings Kitchen Appliances Ovens, mixers, to... | |
| PVC Powder Coating for Chemical Corrosion Resistance | Product Overview PVC Powder Coating for Chemical Corrosion Resistance is developed to protect metal components that operate in aggressive chemical... | |
| Polyurethane waterproof coating A STD-939 | Product Description The polyurethane prepolymer has a high resin content with excellent ratio of NCO, which can form a highly dense and elastic wa... |
Same products
| Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... | |
| Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... | |
| Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... | |
| Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... | |
| Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
















