UV Lamp For UV Paints Curing

Portable hand-held curing uv lamp instructionsA: the scope of application:1: can be used for floor paint curing, model making, arts and crafts  forming, scientific experiments, etc.2: special UV curing molding, model making, arts and crafts.3: suitable for furniture, floor surface polishing, such as artificial  stone (marble surface glazing toughened) site construction, etc.4: suitable for UV glue (UV glue crystal, electronic UV glue, UV shadowless  glue, UV potting glue, etc.), rapid curing, laboratory and temporary  construction simple maintenance Can be used with conveyor belt form a complete  set of 5: suitable for UV ink, ink, such as UV light oil coating experimental  small batch production 6: car large area of UV paint, UV light oil curing, small  area repair, interior decoration, etc.7: paint ageing test, the test of all kinds of scientific experiments.Features:1. This uv lamp usage convenience, adopt fission type  structure, simple operation, easy to use (include power box and lamp box two  parts), can be arbitrary fixed, curing from multiple perspectives.2: work power AC220v 50 hz, power saving less noise.3: using small axial  flow fan air cooling on the tubes. Light box power box connection wire length  about: 3 m, input about the power cord length: 1.6 m.4: the uv lamp is equipped with automatic air switch, use safety.5: reflective aluminum radiator outside lampshade and imported mirror  reflective aluminum sheet, the largest UV light refraction, strengthening drying  curing effect.Method of use:1: close the power box behind the total power switch, power indicator light  is lit, the machine is in standby mode. 2: after turning on the power supply,  open the lamp switch after waiting for about 1 minute) after (current meter from  high to low and stable, start work lamp cooling switch.3: turn off the light  switch delay after work has stopped 5-10 minutes of light restarted after  cooling.4: start the uv lamp, immediately after turn off the lights don't light is  a normal phenomenon, after uv lamp cooling can light up. (low winter  temperatures indoors best start, low environmental temperature also affect the  tubes).Matters attention1: the staff must be equipped with special uv protection glasses, must wear  long sleeve clothes, to go the rubber gloves, forbid ultraviolet light  irradiation directly to the skin.2: natural ventilation requirements work environment.       3: such as indoor work must assemble ventilator, ensure indoor air flow good.4: check whether earth wire grounding.5: when the fan is not normal, do not use, so as to avoid burning lamp.6: when changing a tube, don't touch the lamp with the hand, cause a mole,  on the lamp in case influence the luminous efficiency, must wear clean gloves  for installation.7: pay attention to maintenance the tubes, wipe on a regular basis (keep  the tube surface clean), rotate 180 degrees on a regular basis, in order to  guarantee the life of the tube well.Technical parametersIrradiation distance: 80-200 - mm cooling: air cooling exhaustPower density: 80-120 - w/cm brightness range value: 1000-9500 ㎡ MMJ/CSpectrum peaks: 365 nm electric source: AC220V, 50 to 60 hzLamp tube, high pressure mercury lampModel selection 150 watts - 3 kwLamp irradiation range power supply1 kw 150 mm (tube length: 23 cm) 220 v, 50 hz2 kw 250 mm (tube length: 40 cm) 220 v / 380 v, 50 hz3 kw 350 mm (tube length: 50 centimeters) 220 v / 380 v, 50 hz500 w to 75 mm (tube length: 17 cm) 220 v, 50 hz(power box shell note grounding line)According to the customer's requirements Other models can be customizedThe instantaneous drying, high-tech environmentally friendly products 

Other supplier products

	Agent K	Hengyi Automation Equipment Co.,Ltd is a professional agent k, surfactant manufacturer, factory, plant and supplier, we are always at your service....
	spray chrome chemicals and srapy chrome formula to sell	HengYi Automatic Equipment Co.,Ltd,have spray chrome chemcails and spray chrome formula to sell.Use spray chrome system to spray different prodcuts...
	Magnetic Control Vacuum Coater	Hengyi Automation Equipment Co.,Ltd is a professional magnetic control vacuum coater manufacturer, factory, plant and supplier, we are always at yo...
	Spray Chrome Equipment Unit	Hengyi Automation Equipment Co.,Ltd is a professional spray chrome equipment unit, spray chrome machine unit, spray plating system, spray chrome pl...
	Spray Chrome UV Paint	Hengyi Automation Equipment Co.,Ltd is a professional spray chrome uv paint, uv primer, spray chrome uv paints, spray chrome uv paint, uv base coat...

All supplier products

Same products

	3-IN-ONE 100703 118ml Lubricates, cleans & Prevents Rust	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	The new3-in-One® multi-purpose oil with telescoping marksman spout comes in handy when precis...
	LUBCON Thermoplex ALN 1001/00 50ml Oil Original New	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Lubcon THERMOPLEX ALN 1001/00is a synthetic semi-fluid gear grease can be used on ASM Siemens mac...
	Kluberoil Lamora D 220 30ml Original Oil	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Our oils offer excellent lubricity also at low sliding speeds, enabling constant and precise feed...
	LUBE SH-ONE-4S 400G for Fanuc Machines	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Lubecorp part number 249250 is a 400ml bellows style cartridge often times used in autolube appli...
	Mobil Grease 28 Synthetic Aviation Grease	Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd.	Mobil grease 28is a high performance, antiwear grease. Available as a cartridge,2kgcan, 16kg pail...