HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANT

HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANTT903 HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANT Product IntroductionT903 is a kind of silicon-ether type polymer. It is milk white to light yellow liquid, with favorable oil antifoaming, oil solubility and stability. It can not only overcome the disadvantage of bad stability and little solubility of silicon-oil antifoam agent (T901), but also relieve the problem of possibly lose of antifoam property due to overhigh air-release-value of non-silicon oil antifoam agent when there exists some additives, and prolong the service life of lubricating oils.APPLICATIONSThis product is used primarily for various lubricant oils.Reference dosageThe dosage is from 3.0mg/kg to 5.0 mg/kg.SpecificationITEMTYPICAL VALUE TEST METHODDensity(20°C), g/cm3890~950GB/T 1884Flash Point (open cup), °C60GB/T 267Solidifying Point, °C-15GB/T 510Water,m%TraceGB/T 260Impurities, m%0.05GB/T511Packing & Storage This product should be operated as SH/T0164 during the storage,loading and unloading and oil blending. The highest temperature should not exceed 75 ℃,during long-term storage, the highest temperature should not be more than 45 ℃.This product is non-flammable, non-explosive and non-corrosive.In terms of safety, environmental protection and application, it is the same as general petroleum products, there is no need for special protection.
Other supplier products
|
|
HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANT |
HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANTT903 HIGH REACTIVE TYPE ANTIFOAM AGENT FOR LUBRICANT Product IntroductionT903 is a kind of silicon-e... |
|
|
Additive Quenching Oil |
additive quenching oilT6004-1 Quenching Oil Additive PackageProduct Introduction
T6004-1 is formulated with a variety of additives, such as effi... |
|
|
OCP |
OCPT616 High-grade Gasoline Engine Oil Viscosity Index Improver v100=1300Product IntroductionThis product is a kind of hydrogenated styrene isopren... |
|
|
BENZOTRIAZOLE |
BENZOTRIAZOLET706 BENZOTRIAZOLE 1. DESCRIPTIONThe product is a white to light yellow acicular crystal, slightly soluble in water, and soluble in or... |
|
|
Turbine Oil Additive Specification |
turbine oil additive specificationT6001A Heavy Duty Turbine Oil Additive PackageProduct IntroductionT6001A Heavy duty turbine oil additive package ... |
All supplier products
Same products