Chain Oil Additive
Chain Oil AdditiveT6012 High-temperature Chain Oil Additive PackageProduct Introduction T6012 is an excellent ashless additive package which is developed for high-temperature chain lubricant oil. It is made from high temperature antioxidant composition, anti-wear composition, anti-rust and corrosion inhibitor and other additive composition .It can be used for the blending of high-quality and high-temperature chain oil, which has excellent high temperature stability, low evaporation loss, low carbon deposition and coking tendency as well as excellent lubricating properties at high temperature. It does not produce any harmful gases, also can reduce the downtime for cleaning accumulated solids to keep the chain clean. Reference dosage ItemAdviceVariety of petroleum products and dosagesMineral oil-based high-temperature chain oil 2.4%（m）Polyester type high-temperature chain oil 1.8%（m）The synthetic ester type high-temperature chain oil 1.2%（m）Base oil typeAPI I, II, III, IV, V group or their mixture, which should be based on the requirements of environment and temperature for useOther additivesNo need in generalBlending temperature for petroleum products≤ 65 ℃ SpecificationItemTypical ValueTest MethodAppearanceOrange transparent liquidVisualFlash Point(COC),℃215 ℃GB/T267Kinematic Viscosity（40℃）,mm2/sReportGB/T265Density（20℃）,g/cm3ReportGB/T1884Nitrogen,%, m1.68SH/T0224Phosphorus,%, m1.51SH/T0296TBN,mg KOH/g52.5SH/T0251Packing & Storage The storage temperature suggested should be lower than 50℃, and the highest temperature of loading, unloading and blending should not exceed 60℃. This product should be operated as SH/T0164 during the storage, loading and unloading and oil blending. It is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and application, it is the same as general petroleum products, there is no need for special protection. The product is packed in 200 liter metal drum or other packing methods conforming to user requirements.
Other supplier products
|
|
Zinc Dialkyl Dithiophosphate |
zinc dialkyl dithiophosphateT203 Zinc Dioctyl Primary Alkyl DithiophosphateProduct IntroductionT203 is Zinc Dioctyl Primary Alkyl Dithiophosphate. ... |
|
|
VII |
VIIT615 Ethylene-Propylene Copolymer v100=600Product IntroductionIt is an ideal viscosity index improver and has good shear stability, excellent th... |
|
|
Antioxidant And Corrosion Inhibitor |
Antioxidant and Corrosion InhibitorT204 Zinc primary-secondary Alkyl Dithiophosphate Product IntroductionT204 is Zinc primary-secondary Alkyl Dithi... |
|
|
Sm Sn Engine Oil Additive |
sm sn engine oil additiveT3070 SM Gasoline Engine Oil Additive PackageProduct IntroductionT3070 has been developed for API SM level of gasoline eng... |
|
|
Motor Car Oil Additive |
motor car oil additiveT3199 CJ-4 Diesel Engine Oil Additive PackageProduct Introduction
Extend the service life of engine; saving fuel oil;
P... |
All supplier products
Same products
|
|
SiSiB® PC9236 |
Seller: Nanjing SiSiB Silicones Co., Ltd |
N,O-Bis(trimethylsilyl)trifluoroacetamide
SiSiB® PC9236, BSTFA structureBSTFA TMCS, is a cle... |
|
|
SiSiB® PC9235 |
Seller: Nanjing SiSiB Silicones Co., Ltd |
N,O-Bis trimethylsilyl acetamide
SiSiB® PC9235 (BSA) silane is a colorless to slightly yello... |
|
|
SiSiB® PC9233 |
Seller: Nanjing SiSiB Silicones Co., Ltd |
Bis trimethylsilyl acetylene
SiSiB® PC9233 (BTMSA) is a colorless clear liquid (solid in win... |
|
|
Bare Copper Wire for Electrical Purpose |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Electrical Bare Copper Wirefor Electrical Purpose
Copper's excellent electrical and thermal cond... |
|
|
Bare Copper Wire (8mm) |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Bare Copper Wire (8mm)
The electrical round copper wire products produced by our company are wid... |
