Graphite Grounding Wire
Graphite GroundWire
Oxygen-free hot-dip (horizontal continuous casting process) manufacturing, copper metallurgical molecular bonding, surface hot-dip tin, no chemical corrosion and galvanic effect, does not affect cathodic protection.
- Graphite Grounding WireMain Performance Characteristics
The grounding body is cable-shaped and made of high-carbon graphite wire. The connecting end connected to the tower is made of stainless alloy. This product is a non-metallic conductor, which is resistant to corrosion, rust, stable grounding resistance, and high-current impact without counterattack. No damage, constant resistance, high and low temperature resistance, long service life of 30 years, maintenance-free, safe and reliable. It is free from environmental and climatic conditions, easy to install, no need for electric welding, saves labor and time, saves materials, funds, energy saving, environmental protection, anti-theft, especially suitable for acidic soil, alkaline soil, swamp, hot and humid zone and beach.
Solid state resistivity: 0.06 Ω. m
Inrush current resistance: (200KA) ΔR% ≤ 0
Power frequency current tolerance: ΔR% ≤ 0
High temperature performance: 300 ° C
Low temperature performance: -60 ° C
Compressive strength: ≥ 1200Mpa
Tensile strength: ≥ 1200Mpa
Graphite wire surface Moss hardness: 1-2
Annual average corrosion rate of buried surface: 0
Graphite Grounding Wire
Cable Welding CapsuleNew
The cross-sectional area of the cable is 20×20mm, 16×16mm, 4×4mm, 5×5mm, and the length can be processed according to the user's design requirements.
The amount of this product is calculated according to the amount of galvanized steel with a diameter of 10mm.
According to the design requirements of Party A's drawings during construction.
Installation and construction under the technical guidance of the factory.
This copperweld ground wireshould be installed in the shape of a mouth, and the two joints should be closed.
The connection method is lap joint, and the conductive graphite wire is wound and fastened, and the length dimension of the tower connection is 10 times of the diameter of the grounding body.
The grounding body ditch should be flat, buried with fine wet soil, layered and compacted.
Prevent sharp objects from scratching the graphite cable body, protect the cable from conduction and the leakage layer from damage.
Use steel pipe to protect the roadbed.
When the product is used in a special section, the connecting body needs to be reinforced.
Copper Clad Steel Grounding Conductors Advantage:
- copper clad rodhas strong corrosion resistance and will not come off, warp or crack. The corrosion of the grounding body of the grounding grid is reduced, and the overall operation safety of the equipment is enhanced.
Send product request
Other supplier products
 |
Exothermic Welding Mold | Ningbo Zhenhai Beisuda Petrochemical Equipment Co.,Ltd located in Ningbo, Zhejiang, it is a professional enterprice, who focus on R&D, producti... |
 |
Ground Module | BEST Grounding Module Performance and characteristics of BEST grounding module: The low-resistance grounding module is a non-metallic material-base... |
 |
CCS Flat Bar | Copper-clad Flat Steel The most superior performance of copper-clad flat steel is the increased grounding surface area, which has improved the elec... |
 |
CCS-Stranded Cable | Ningbo Zhenhai Beisuda Petrochemical Equipment Co.,Ltd located in Ningbo, Zhejiang, it is a professional enterprice, who focus on R&D, producti... |
 |
Exothermic Welding Mold | Exothermic welding, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes... |
Same products
 |
Bare Copper Wire for Electrical Purpose | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Electrical Bare Copper Wirefor Electrical Purpose Copper's excellent electrical and thermal cond... |
 |
Bare Copper Wire (8mm) | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Bare Copper Wire (8mm) The electrical round copper wire products produced by our company are wid... |
 |
Anti-dezincation Brass Rod | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Anti-dezincation Brass Rod The anti-dezincification copper rods produced by our company can be... |
 |
Anti-Corona Magnet Wire | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Anti-Corona Soldering Magnet Wire The anti-coronaenameled copper wirefor frequency conversion mo... |
 |
Annealed Copper Wire (2.6mm) | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Annealed Copper Cable(2.6mm) The annealed bare copper wireproduced by our company are widely use... |
