Polyken955-25 Pipeline Protection Tape
If you are looking for China golden supplier and China good supplier polyken955-25 pipeline protection tape,Website:, good quality and high quality polyken955-25 pipeline protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.System DescriptionThe polyken955-25 pipeline protection tape is used for steel pipe for surface corrosion protection tape.Cold Applied Tape for pipeline coating is suitable to any diameters for petroleum, natural gas, water supply, city gas, oil and electric power industries etc. the systems are inner wrap tape and outer wrap tape, primer and Putty. POLYKEN 980,955 is a multilayer system used for the protection of steel pipelines. POLYKEN 1019,1027, Liquid Adhesives can be used as primers for this system.In addition to serving as primers, these liquidadhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.The Middle and Outer Mechanical Protection Layers provide exceptional handling and in-service protection ofthe coating system. The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives.The POLYKEN 980/955 can also be used for ductile iron pipes, in this case the use of 1027 primer is recommended.FeaturesExcellent adhesion to inner-layer tape and selfResistant to UVCan be applied over a wide temperature rangeGood conformability and consistent uniform thicknessEasily applied with no special equipmentCompatible with common pipe coatingsExcellent resistance to cathodic disbondingMeets ASTM D 1000 StandardCold appliedStructureBacking : Special blend of stabilized polyethylene Adhesive : Butyl rubber and Adhesion Promoting ResinsColor :Black or WhitePropertiesProduct PropertiesTest methodTypical ValuePOLYKEN 955-15POLYKEN 955-20POLYKEN 955-25POLYKEN 955-30Total Thickness15mil(0.381mm)20mil(0.508mm)25mil(0.635mm)30mil(0.762mm)Backing of PE film10mils(0.254 mm)15mil(0.381mm)20mil(0.508mm)25mil(0.635mm)Butyl Rubber Adhesive5 mils(0.127 mm)5mil(0.127mm)5mil(0.127mm)5mil(0.127mm)Tensile StrengthASTM D100050N/cm60N/cm70 N/cm80 N/cmElongationASTM D1000300%350%350%450%Peel Adhesion to Primed SteelASTM D100024 N/cm25 N/cm26.5 N/cm33 N/cmWater Vapor Transmission RateASTM E 960.10g/m20.10g/m20.08g/m20.06g/m2Water absorption after 1 day,At+23℃ASTM D5700.10%0.10%0. 08%0. 06%Volume ResistivityASTM D 2572.0 x 1015 ohm.cm2.5 x 1015 ohm.cm2.6 x 1015 ohm.cm2.6 x 1015 ohm.cmDielectric StrengthASTM D14930 kv36 kv43 kV45 kVOrdering InformationPOLYKEN 980 and 955 tape coatings are in roll form.Eg.: POLYKEN 955-20 WHI 6"×400'POLYKEN 955Product Model No.Standard ordering options20Total tape thickness in mils15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)WHITape backing colorWhite (WHI)6Tape width in inches2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)400Tape roll length in feet100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)
Other supplier products
All supplier products
Same products
