Heavy Weight Drill Pipe
Heavy Weight Drill Pipe
Heavy weight drill pipeis a medium-weight drill tool similar to drill pipe,whose wall is thicker than that of drill pipe and thinner than that of drill collar. Its tube is connected with special length-added drill pipe joint(integral heavy weight drill pipe is made up of tube and tool joint). Among assemblies,it is generally added between drill pipe and drill collar to prevent sudden changes in cross-section of drill string,and reduce its fatigue. Using it to replace part of the drill collar can reduce torque, improve load,and increase drilling ability during deep well drilling;meanwhile pick-up sub and safety clamp will not be used drilling operation ,which is easy to operate and can save tripping time.It can drill in in high speed under low torque in directional wells and reduces the abrasion and fracture of string without differential pressure and sticking because of the lower steel grade than drill collar, small touching area with the well wall.
square Kelly China:Found Petroleum Equipment
If you are finding high quality and cheap API 7-1 Heavy Weight Drill Pip, you can choose us! We adhere to the principle of good faith cooperation and look forward to working with you as a partner!
CHEMICAL COMPOSITION
Integral heavy weight drill pipe |
||||||||
Size |
Outer diameter |
Inside diameter |
Joint outer diameter |
Joint inside diameter |
Connecting thread |
Slip max. diameter |
Upset middle diameter |
|
3 1/2 |
3 1/2 |
2 1/4 |
4 3/4 |
2 1/4 |
NC38 |
3 7/8 |
4 |
2 |
2 1/16 |
(4 7/8, 5) |
2 1/16 |
1 13/16 |
|||||
4 |
4 |
2 1/2 |
5 1/4 |
2 1/2 |
NC40 |
4 3/16 |
4 1/2 |
2 1/4 |
2 9/16 |
2 9/16 |
2 5/16 |
||||||
4 1/2 |
4 1/2 |
2 11/16 |
6 1/4 |
2 11/16 |
NC46 |
4 11/16 |
5 |
2 7/16 |
2 3/4 |
2 3/4 |
2 1/2 |
||||||
2 13/16 |
2 13/16 |
2 9/16 |
||||||
5 |
5 |
3 |
6 5/8 |
3 |
NC50 |
5 1/8 |
5 1/2 |
2 3/4 |
5 1/2 |
5 1/2 |
3 1/4 |
7 |
3 1/4 |
5 1/2 FH |
5 11/16 |
6 |
3 |
3 3/8 |
(7 1/4, 7 1/2) |
3 3/8 |
3 1/8 |
|||||
3 7/8 |
3 7/8 |
3 5/8 |
||||||
4 |
4 |
3 3/4 |
||||||
6 5/8 |
6 5/8 |
4 |
8 |
4 |
6 5/8 FH |
6 15/16 |
7 1/8 |
3 3/4 |
4 1/2 |
(8 1/4, 8 1/2) |
4 1/2 |
4 1/4 |
|||||
5 |
5 |
4 3/4 |
Spiral heavy weight drill pipe |
||||||||
Specification mm |
Tube |
Joint |
||||||
ID mm |
Elevator upsetmm |
elevator groove/Slip outside diameter mm |
Screw in diametermm |
Spiral groove depthmm |
Thread Type |
OD mm |
ID mm |
|
54 |
NC38 |
54 |
||||||
127 |
NC46 |
|||||||
127 |
NC50 |
Steel Mark |
Chemical Composition% |
||||||||
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Cu |
Al |
|
4145H |
≤0.03 |
≤0.03 |
≤0.2 |
||||||
Other Elements:N≤0.015,Ni≤0.5 |
Yield strength |
Tensile Strength |
ElongationA% |
HB |
Charpy impactAkv J |
||
MPa |
Psi |
MPa |
Psi |
|||
≥758 |
≥110000 |
≥965 |
≥140000 |
≥13 |
285~341 |
≥54 |
Product superiority:
In the process of heat treatment, a normalizing process is added, which makes the threads more granular, increases the thread strength, and effectively improves the service life of the product.
Weld heavy weight drill pipe:
Using the current domestic and foreign advanced heat treatment technology of friction welding deformation ,and heat affected zone smaller, welding process more simple and strict welding deformation and heat treatment standard procedure qualification, tuning parameters to ensure better welding quality more stable and reliable.
Welded heavy weight drill pipe |
||||
Type |
Outer diameter |
Inside diamter mm |
Joint type |
|
mm |
in |
|||
MJZ29-NC31-I/II |
2 7/8 |
NC31 |
||
MJZ35-NC38-I/II |
3½ |
NC38(3½ IF) |
||
MJZ40-NC40-I/II |
4 |
NC40(4FH) |
||
MJZ45-NC46-I/II |
4½ |
NC46(4IF) |
||
MJZ50-NC50-I/II |
127 |
5 |
NC50(4½ IF) |
|
MJZ55-5½ FH-I/II |
5½ |
5½ FH |
||
MJZ66-65/8FH-I/II |
Aug-65 |
65/8FH |
||
127 |
Send product request
Other supplier products
Grade HY Sucker Rod for Oil Drilling | Grade HY Sucker RodOn Sale With Good Price Grade HY Sucker Rod DescriptionGrade HY Sucker Rodwith factory price If you have any question on Grade ... | |
Grade D Sucker Rod | Grade D Sucker Rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are ef... | |
API AISI 4140 Polished Rod | Spray Polished Rod Function of Polish Rod Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top o... | |
main rib drill pipe | How to maintain the phenomenon of wear of the main rib drill pipe? Shared by. In ultra-deep Wells, high-slant Wells, long-displacement Wells and h... | |
Hexagonal Kelly | Kelly is located in the top of the drill string, with square and hexagonal.In rotary drilling, when it is drilling, kelly connected with square bus... |