Fuel combustion improver STD-8
Fuel combustion improver STD-8 is made of new nano rare earth composite organic compound field as catalyst and is prepared by special process. Adding proper proportion of STD-8 can significantly enhance the quality of fuel and improve the combustion conditions of fuel to achieve clean protection of equipment, extend equipment service life, save fuel, greatly reduce the generation of harmful substances, reduce emissions, and be environmentally friendly.
Properties
The appearance of this additive is a clear and transparent reddish-brown oily liquid, which is completely soluble in fuel.
Uses
STD-8 fuel combustion improver can be added to the oil filling tank in advance. It is recommended to inject it with an oil pump. The addition ratio is 1:1000~2000. It should be mixed with fuel as evenly as possible before use. During use, users can add a mixing device according to actual conditions to make it more evenly mixed, so as to achieve an ideal fuel-saving effect.
Precautions
Do not contact eyes and skin. If it sticks to the skin, rinse with plenty of soap and water. If it is serious, go to hospital for treatment immediately.
Packaging
This additive is packaged in plastic-lined iron barrels or plastic barrels, with a net weight of 160 or 25 kg.
Safety protection
This additive is non-toxic and should be protected from sunlight, rain and impact during transportation. It should be stored in a dry, cool and ventilated place, away from heat and fire sources.
Send product request
Other supplier products
 |
Pure polyester/TGIC powder coating | Product description This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting p... |
 |
Comprehensive water treatment agent STD-10 | The comprehensive water treatment agent STD-10 is a multifunctional additive with the following characteristics: synergistic effect, which can cont... |
 |
Dual-Layer Epoxy Anti-Corrosion Powder Coating (External Coating) | Product Introduction: This dual-layer epoxy powder coating is formulated using multiple types of epoxy resins and functional curing agents. The ba... |
|
|
Pure epoxy primer powder MT Plus -AL117N | Product Description Pure epoxy primer powder MT Plus -AL117N is a powder primer protective barrier designed to give enhanced corrosion protection ... |
|
|
Sand-textured powder coatings | Introduction Sand-textured powder coatings are a unique type of finish that provide a distinctive, tactile surface with a granular or sandy appear... |
