Oil viscosity reducer STD-1
Oil viscosity reducer STD-1 contains surfactants, which can effectively reduce the viscosity of oil, improve thermal efficiency, and reduce power loss. This additive has good thermal stability and strong water resistance. It dissolves in aromatic and aliphatic hydrocarbons and does not contain halogens and heavy metal elements.
Properties
This additive has a brown or yellow oily liquid appearance and is irritating to the human body.
Uses
This additive is mainly used to reduce the viscosity of raw materials, quench oil and refinery residue oil of ethylene units, reduce power loss, and extend the operating life of equipment.
Precautions
1. The injection point must be based on the requirements of the system viscosity reduction to ensure that the additive and the process medium are fully mixed when entering the equipment;
2. The general injection concentration is 1~10mg/kg (based on the circulation volume of quench oil). 8mg/kg can be injected first, run for several days, and then gradually reduced to 5mg/kg, observe the effect, and determine the best injection concentration;
3. This additive can be continuously and evenly injected at room temperature or on-site temperature with a metering pump. If necessary, it can also be diluted with a solvent to a certain concentration of solution before use.
Packaging
This additive is packaged in a plastic-lined iron barrel or plastic barrel with a net weight of 170±0.5kg.
Safety protection
Store in a cool and low temperature place, avoid contact with fire or heat sources. In case of fire, use dry powder or carbon dioxide fire extinguisher to extinguish the fire.
Send product request
Other supplier products
 |
Single-Layer Epoxy Anti-Corrosion Powder Coating (External Coating) | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is formulated using epoxy resin, functional curing a... |
 |
Insulating Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: High electrical insulation properties, with a large resistance coefficient an... |
 |
Automotive components powder coatings Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A1230 series covers a wide range of powder coatings specific... |
 |
Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R | Product Description The visual effect achieved from the final headlamp reflector is of the utmost importance and a quality powder primer is the ke... |
 |
Metallic plane POWDER COATING MT-629/93601 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-629/93601 Color Gray Surface Metallic plane System Resin i... |
