TOOKE O-ring Silicone Lubricant Maintenance Grease for Waterproof Diving Flashlights
Description:
Silicone lubricant for O-ring of all kinds of waterproof camera housing.
Underwater photographic equipment cannot be watertight unless the O-rings that seal it are flawless. Always carry spare O-rings in your camera case.Every time you open the camera to change film, examine the O-ring and service if necessary.Always clean and lubricate after every diving day.
When in doubt about the sealing capability of an O-ring, always discard and replace. Never use a sharp or pointed object to remove an O-ring! Use the O-ring remover tool.Don't over grease! Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease can enhance the housing's water resistance and protect the O-ring from abrasion. But please note it couldn't be instead of a sealant.
Specification: Product Model: TF-65005 Weight:5g Applying on the O-ring to enhance the underwater camera housing‘s waterproof function. Note: Before using the product, please wash or clean the oil on the O-ring.
Send product request
Other supplier products
 |
TOOKE Diving One Side Arm System Bracket Underwater Photography | 【Specification】 Weight：360g Material: corrosion-resistant aluminum alloy(6061) hard anodized finish. Color: Black |
 |
TOOKE Z type Short Arm Handle Bracket Diving Photography | Material: corrosion-resistant aluminum alloy(6061) hard anodized finish. Color:Black It can't be set the housing directly,there should be add a tra... |
 |
M67 Wet-Lens Adaptor Mount Connector Port for Canon G12 G15 16 WP-DC48 52 Waterproof Housing | 【Specification】 Material: corrosion-resistant aluminum alloy(6061) hard anodized finish Attention:The wet-lens adapter and the flash diffusers can ... |
 |
Tooke Hot Shoe Arm 360 Degree Turnable Ball Head Mount for Underwater Photography & Housing Arm System | Weight ：50g Material ：corrosion-resistant aluminum alloy(6061) hard anodized finish Usage:Put it on the housing,which has the hot shoe setting. |
 |
TOOKE Surface Marker Inflatable Dive Buoy Dive Rite Scuba Diving SMB See Me Float Tube Orange with blue bag | 【Specification】 Size： 140*16cm Material：PVC Rope：4.5M A compact version of our Surface Marking Device, the Seeme Float is often referred to as a "... |
