Tetramethyl thiuram monosulfide
TMTM(TS)
Chemical Name:Tetramethyl thiuram monosulfide
Structure:
Molecular Formula:C6H12N2S3
Molecular Weight:208.4
CAS NO:97-74-5
Specification:
Item Powder Oiled powder Granule
Appearance Yellow powder(granule)
Initial M.P.οC≥ 105.0 105.0 105.0
Loss on drying%≤ 0.30 0.40 0.30
Ash%≤ 0.30 0.40 0.30
Residues on150μm sieve, %≤ 0.10 0.10
Residues on63μm), %≤ 0.50 0.50
Additive, % 1.0-2.0
Granule Diameter, mm 1.0-3.0Properties:The yellow powder (granule). The density is 1.37-1.40. No osmyl and no taste. Soluble in benzene, acetone,CH2CI2,CS2, toluene, party soluble in alcohol and diethyl ether, insoluble in gasoline and water Stabilization for storage
Application:Generally used as a secondary accelerator or as a booster for sulphenamides to achieve faster cure rate Distinguished by very good processing safety in comparison with other thiurams, high curing activity and no discoloration. No cure activilty in the absence of added elemental sulphur. An excellent accelerator for polychloroprene in association with DPG and Sulphur. It's critical temperature is 121οC .
Packaging:20kg/25kg plastic woven bag, paper with plastic film bag, kraft paper bag.
Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35οC can cause unusual compacted product. The validity is 2 years.
Other supplier products
|
|
Rubber Antioxidant 4010NA(IPPD) |
IPPD(4010NA)
Commodity Name :Rubber Antioxidant 4010NA(IPPD)
Chemical Name : N-isopropyl-N'-phenyl-p-phenylene diamine
Chemical Structure:
... |
|
|
rubber additive MBTS(DM) |
MBTS(DM)
Chemical Name: Dibenzothiazole disulfide
Structure:
CAS NO: 120-78-5
Specification: NO. Item Unit Specification
NO. Item Uni... |
|
|
rubber additive MBT(M) |
MBT(M)
Chemical Name: 2-Mercaptobenzothiazole
CAS NO: 149-30-4
Specification: NO. Item Unit Specification
NO. Item Unit Specification
1 Appearan... |
|
|
rubber additive DPG(D) |
DPG(D)
Chemical Name:Diphenyl guanidine
Structure:
Molecular Formula:C13H13N3
Molecular Weight:211.27
CAS NO:102-06-7
Specification:
Item Pow... |
|
|
rubber accelerator TMTM(TS) |
TMTM(TS)
Chemical Name:Tetramethyl thiuram monosulfide
Structure:
Molecular Formula:C6H12N2S3
Molecular Weight:208.4
CAS NO:97-74-5
... |
All supplier products
Same products
