.

RTV-1 Silicone Rubber

RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also called non conductive silicone sealant. RTV-1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module components including photovoltaic frame, junction box and micro-inverter, power industry including circuit boards, electronic components, light emitting diode industry including lamp beads, lamp cap and light bar, home appliance including air conditioner, fridge, washing machine, and microwave oven, induction cooker, new energy vehicle including electronic component. GOLOHO RTV-1 silicone rubbers are designed to provide long-term bonding, sealing, encapsulating and protection against moisture, environmental degradation, mechanical and thermal shock, heat dissipation and vibration where a room-temperature-curing product is preferred.

When using RTV-1 silicone rubber, all surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone, or methyl ethyl ketone. Apply a bead of RTV-1 silicone rubber to one of the prepared surfaces, then quickly cover with the other substrate to be bonded. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. Any tooling should be completed before this skin forms. The surface is easily tooled with spatula. GOLOHO RTV-1 silicone rubbers will be tack free in about 5 to 60 minutes. After skin formation, cure continues inward from the surface. In 24 hours (at room temperature and 50% relative humidity), GOLOHO RTV-1 silicone rubbers will cure to a depth of 2 to 3 mm. Very deep sections, especially when access to atmospheric moisture is restricted, will take longer to cure completely. Cure time is also extended at lower humidity levels. Before handing and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by user for each specific application.

GOLOHO POLYMERis an industry leader in the production field ofrtv grease. If you want to know more details or want a quotation, just feel free to contact us!


Send product request

To: GOLOHO POLYMER (CHANGZHOU) CO. LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Light/Moisture Cure Conformal Coating-L213
Light/Moisture Cure Conformal Coating-L213 FEATURES OF GOLOHO-L213 UV rapid cure secondary moisture cure one-component, 100% solid content low viscosity -55℃~120℃ temperature resistance: -55...
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ...
Heat Resistant Silicone Adhesive/Sealant - 3912R
Heat Resistant Silicone Adhesive/Sealant - 3912R heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&...
Light Cure Conformal Coating - L226
Light Cure Conformal Coating - L226 Led seal spray- L226 FEATURES OF GOLOHO-L226 UV rapid cure one-component, 100% solid content low viscosity emperature resistance: -55~120℃ Descri...
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certificationExcellent resistance to high and...
All supplier products

Same products

Low Emission Graphite Packing Set: Industry-Leading Sealing for Critical Applications
Low Emission Graphite Packing Set: Industry-Leading Sealing for Critical Applications Seller: Magpie Valve Packing Gasket Co., Ltd Our plant’s Low Emission Graphite Packing Set is precision-engineered to deliver unrivaled ...
PI High Temperature Resistant Adhesive Tape
PI High Temperature Resistant Adhesive Tape Seller: Guangdong NB Technology Co,.Ltd PI High Temperature Resistant Adhesive Tape Product Description This type of product is resista...
Blue Kingfisher Tile Adhesive is stable and firm and will not fall off easily
Blue Kingfisher Tile Adhesive is stable and firm and will not fall off easily Seller: Zhongshan Blue Kingfisher New Environmental Protection Materials Co., Ltd Core performance Name:Ceramic Tile Cement Main materials: cement, quartz sand, polymer modifier...
LLDPE Stretch Film manufacturer
LLDPE Stretch Film manufacturer Seller: Guangzhou Dewangtai Trading Co., LTD LLDPE Stretch Film manufacturer LLDPE Stretch Film Dewangtai is a leading company specializing i...
Wetting Agent OT-75
Wetting Agent OT-75 Seller: Guangzhou Dewangtai Trading Co., LTD Wetting Agent OT-75 is an auxiliary wetting agent for waterborne pressure sensitive adhesive...