The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver
The100g optical transceiveris an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is a carrier, acting as the transmitting end to convert electrical signals into optical signals, and as the receiving end to convert the optical signals into electrical signals.
Fiber optical transceivers can be divided into SFP, SFP+, XFP, QSFP+, QSFP28, QSFPDD according to the packaging form, and the types of optical interfaces include SC and LC.
Fiber optical transceivers can be divided into 155M, 622M, 1.25G (1024M), 10G (10*1024M), 40G, 25G, 100g optical modules, 200G, 400G, etc. according to the transmission rate.
The higher the transmission rate of the fiber optical transceiver is, the shorter the transmission distance. According to the transmission distance, it can be divided into short distance (2KM and below), medium distance (10 to 20KM), long distance (above 30 to 40KM), including 550M, 300M, 2KM, 10KM, 20KM, 40KM, 60KM, 80KM, 100KM, 120KM.
The longer the wavelength of the fiber optical transceiver, the longer the transmission distance. According to the wavelength of transceiver, it can be divided into 850nm(MM), 1310(nm), 1550(nm), CWDM, DWDM
Fiber optical transceivers are divided into single-mode fiber optical transceivers and multi-mode fiber optical transceivers. Single-mode fiber optical transceivers are suitable for long-distance transmission; multi-mode transceivers are suitable for short-distance transmission. Therefore, the price of a single-mode fiber optical transceiver is a bit more expensive than that of a multi-mode fiber optical transceiver.
The 100G QSFP28 fiber optical transceiver is suitable for a variety of transmission distances and application scenarios, which is mainly used in 100G Ethernet and EDRInfiniBand, and is an important part of the 100G network. It has the advantages of low power consumption, small size, high port density, etc., and is liked by the majority of customers.
The 100G CFP fiber optical transceiver has gone through CFP, CFP2, and now CFP4 fiber optical transceiver. The technology is mature and can support hot swap. However, its volume is larger than that of QSFP28 fiber optical transceiver, with few categories, and it is not suitable for many application scenarios.
CFP4 is specified by CFP MSA, and its size is slightly larger than that of QSFP28. The interface between MAC and PHY varies according to the application, and control and monitoring are achieved through the MDIO interface. Generally it is used for access networks and metropolitan area networks.
100G QSFP28 is specified by IEEE. It is smaller in size than CFP4. It is currently one of the 100G modules with the highest level of integration (CXP is more integrated). The interface between MAC and PHY is CAUI-4, and control and monitoring are achieved through the I2C interface. Generally it is used in data centers.
If you need any kinds of fiber optic products,please contact us, as a professional fiber supplier, T&S is willing to offer you high quality products.
Send product request
Other supplier products
 |
MTP/MPO LOOPBACK | T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b... |
 |
Reason Analysis of Using AOC Active Optical Cable in Data Center Wiring | 40G/100G AOC active optical cable has been globally introduced throughout the aoc data centerfield. Compared to 40G DAC copper cable, 40G AOC activ... |
 |
100G QSFP28 AOC | T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/E... |
 |
PLC TYPE WDM | Instead of taking a thin film filter to mux or demux wavelengths, PLC type achieves the same goal by using chip PLC, which uniformly divides and gu... |
 |
FIBER PATCHCORD & PIGTAIL | patch cord pigtailnormally consists of optical fiber cable and connectors at both ends of the cable, the pigtail is connector assembled at one end，... |
Same products
 |
2D Matrix Fiber Array | Seller: Zhongshan Meisu Technolody Co.,Ltd | Two-dimensional M * N fiber array is a kind of fiber component that has many fibers arranged orde... |
 |
Endoscope Cable for STORZ H3-Z | Seller: Hangzhou Sihan Medical Equipment Co., Ltd | Endoscope Cable for STORZ H3Z Introducing the brand new STORZ H3-Z Cable Replacement, meticulous... |
 |
Steel Fiber For Industrial Floors | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground ... |
 |
Orivision DVI Extender | Seller: Nantong ZYDZ Electronic Co., Ltd. | Orivision DVI Extender ORIVISION offers a wide selection of products for extending DVI video, aud... |
 |
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out | Seller: Nantong ZYDZ Electronic Co., Ltd. | Brand: ORIVISION Model: ZY-DS931 Input Interface: LAN Port*1 Output Interface: SDI*2, audio*1 Vid... |
