Woollen blanket soomth Block Silicone Oil agent with MSDS
M-100 is composed of Polymerization of epoxy silicone oil and ammonia ether, adding epoxy polyether to extension chain at last. ( solvent is ethylene glycol monobutyl ether, Content is 40%). It is efficient resistant to High temperature and alkali.
Basic characteristics
Appearance: slight yellow transparent liquid
Ionic properties: slight cationic
PH value: 6.0-6.5
Emulsifying ability: self emulsifying
Application Areas
Especially suitable for chemical fiber
Smoothness: ★★★★★
Softness: ★★★★
Filling power: ★★★
Elasticity: ★★★
Note: Five star is best
Emulsion method ( take 100 Kgs M100 30% as an example)
M-100: 30Kgs
Glacial acetic acid: 1.2 kgs
Water: 68.8Kgs
Firstly, evenly stir M-100 and acetic acid, then while stirring slowly adding measure water.
If you need a concentration of less than 30% of the emulsion, then with the concentration of 30% emulsion can be diluted with water
Package And Storage
50Kgs or 120Kgs plastic drum. Should be stored in a cool ventilated place, to avoid sun exposure, the storage period is two years.
Send product request
Other supplier products
High-efficiency and concentrated hydrophilic silicone softener as finishing agent for Textile | Physical and chemical property: Appearance: light yellow thick liquid Density (gr/cm3): 0.980 Ionic properties: cation Active content: 85 + 1% Ph v... | |
Multi-functional finishing agent for fabric finishing 6601B | The multi-functional finishing agent is mixture of polyester, polyether compound and hydrophilic polymer. Applied to polyester fabric finishing, ex... | |
New Type Block Silicone Oil chemicals used in Textile Industry M-100A | Product introduction Waxy silicone emulsion M-100A is emulsified by M100. M-100 is composed of Polymerization of epoxy silicone oil and ammonia eth... | |
Textile-specific anion finishing agent | Basic characteristics Appearance:Colorless transparent thick liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in any p... | |
Environmental friendly silicone softener agent | Basic Characteristics Appearance: Colorless transparent liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in water at a... |
Same products
LC12 Two-Component Solvent Free Silicone Conformal Coating | Seller: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... | |
LA-17 Polyether Modified Short Chain Polysiloxane | Seller: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... | |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... | |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... | |
KSS Potassium Diphenylsulfone Sulfonate | Seller: Nanjing Silfluo New Material Co., Ltd. | KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass... |