Trimethylchlorosilane (M3)
Name:
Trimethylchlorosilane
Feature:
Trimethylchlorosilane is a colorless or light yellow transparent irritating liquid.
Trimethylsilyl chloride cas no: 75-77-4
Technical Data of Trimethylchlorosilane
|
Testing Items |
Testing Standards |
|
Trimethylchlorosilane /% |
≥ 99.5 |
|
Methyltrichlorosilane /% |
≤ 0.05 |
|
Tetrachlorosilane /% |
≤ 0.05 |
Description of Trimethylchlorosilane
Trimethylchlorosilane is colorless transparent liquid, and it is volatile, easily hydrolyzed in humid air to free hydrochloric acid. It is soluble in benzene, ether and perchloroethylene. Besides, trimethylchlorosilane is flammable, toxic and corrosive. Sealed and stored in a cool and dry place. Store in a low temperature ventilated place, away from fire and heat source. Separate storage and transportation with oxidizers, acids and bases.
Trimethylchlorosilane Uses
Trimethylchlorosilane is mainly used in the production of end-capping agent MM, silazane, cephalosporins antibiotics, active group protectors, etc.
Storage and Transportation of Trimethylchlorosilane
Storage: Stored in a shady, cool, and ventilated place. It should be kept away from kindling and heat sources, avoid direct sunlight.
Transportation: When transported, avoid rain and direct sunshine.
Health Hazards of Trimethylchlorosilane
Invasion route: inhalation, ingestion, transdermal absorption.
Health hazards of trimethylchlorosilane: Strong irritation to respiratory tract and eyes, skin mucous membrane. Inhalation can cause death due to spasm and edema of larynx and bronchus, chemical pneumonia, pneumonia and pulmonary edema. Exposed workers often have eye pain, tearing, coughing, headache, nausea, vomiting, wheezing, easily agitated, and itchy skin.
Toxicological information and environmental behavior
Hazardous characteristics of trimethylchlorosilane: Flammable, in contact with high heat, open flame or with oxidizing agents, there is a risk of causing combustion and explosion. Release toxic and corrosive fumes when heated or exposed to moisture liberation heat. Corrosive.
Combustion (decomposition) products: carbon monoxide, carbon dioxide, silicon oxide, hydrogen chloride.
Leakage Emergency Treatment of Trimethylchlorosilane
Quickly evacuate personnel from the leaking contaminated area to a safe area, and isolate and strictly limit access.
Cut off the source of fire.
It is recommended that emergency response personnel wear self-contained positive pressure respirators and fire protective clothing.
Do not come into direct contact with the spill.
Cut off the source of the spill as much as possible and prevent access to restricted spaces such as sewers and drainage ditches.
Small leakage: mix with sand, dry stone type or soda ash. You can also brush the emulsion with non-flammable dispersant making surface, and dilute the washing solution into the wastewater system.
Large amount of leakage: Construct a dike or dig a pit to shelter. Cover with foam to reduce vapor disaster. Transfer to tanker or special collector with explosion-proof pump, recycle or transport to waste disposal site for disposal.
Zhongtian East Fluorine Silicon Material Co., Ltd. Is a silicone products manufacturer, we provide tmscl reagent, methyl chlorosilane, me3sicl et3n, chlorotrimethylsilane msds, etc. Want to know more info about chlorotrimethylsilane density, contact us.
Send product request
Other supplier products
 |
Silicone Rubber (HTV) | HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen b... |
 |
Room Temperature Vulcanized Silicone Rubber | Product Name: Room Temperature Vulcanized SiliconeRubber （Methyl RTV 107/OH Polymer） Molecular Formula: HO[(CH3 ) 2 SiO]nH CAS No.: 70131-67-... |
 |
Silicone Sealant | Silicone sealant is a part of silicone products. It is mainly divided into deacetic acid type, dealcoholic type, deamination type and oxime type. S... |
 |
Dimethyldichlorosilane（M2） | This product is a colorless transparent liquid, inflammable, explosive. Dimethyl dichloro silaneis the raw material of silicone products, the react... |
 |
Polydimethylsiloxane | Name: Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Da... |
Same products
 |
OSi PEMS 57 CAS 70914-12-4 | Seller: OSi Holding Limited | Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Seller: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Seller: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
