Chlorinated Rubber Boot Topping Paint
Under FUXI® brand, Jinhai Special industrial coatings serviceshas developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, polyurethane, fluorocarbon, chlorinated rubber, ethylene and other coatings. We keep developing new solvent-free paints, water-based paints and eco-friendly coatings, interior wall paint, polyurethane paint, Solvent-Free Coating, marine grade paint and earnestly fulfil the social responsibility of environmental protection.
Chlorinated rubber boot top antifoulingpaint is formulated with chlorinated rubber as the base material, adding plasticizers, pigments, fillers and additives. It has excellent water resistance, weather resistance, resistance to alternating dry and wet and has good mechanical strength and resistance to abrasion and impact. It is mainly used in the splash zone where the hull is often immersed in seawater, washed and exposed to sunlight.
Advantage of Chlorinated Rubber Boot Topping Paint
Excellent weather and seawater resistance.
Excellent oil and abrasion resistance
Quick drying and good compatibility with a wide range of coating systems.
Can be applied at -20℃
Specification of Chlorinated Rubber Boot Topping Paint
|
Type |
Solvent |
||||
|
Solid Content |
60% |
||||
|
Mixing Ratio |
One component |
||||
|
Dry Film Thickness |
30μm per coat |
||||
|
Specific Gravity |
|||||
|
Coverage Rate (Theoretical) |
|||||
|
Drying Time |
Temperature |
10℃ |
20℃ |
30℃ |
|
|
Dry to touch |
40mins |
30mins |
20mins |
||
|
Dry Hard |
6hrs |
5hrs |
4hrs |
||
|
Package |
20kgs for one kit |
||||
Send product request
Other supplier products
 |
Acrylic Modified Vinyl Perchloride Anticorrosive Finish | Acrylic modified vinyl perchloride anticorrosive finish is formulated with vinyl perchloride resin and modified acrylic resin, pigments and solvent... |
 |
BUILDING PAINT | Coatings applied to buildings for decoration and protection are collectively referred to as building paint/building coating. Building paints hav... |
 |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion resistance. It is well-matched with other intermedia... |
 |
Epoxy Shop Primer (Iron Red) | The epoxy shop primer paintis composed of iron oxide red, epoxy resin, anti-rust pigment, filler, solvent, etc. The paint is fast-drying. After 5-1... |
 |
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) | Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) Chlorinated rubber anticorrosive intermediate paint is formulated as an anti-corrosion u... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
