PIPELINE COATING
Pipeline epoxy coatingis an economical and practical solution to maintain pipeline, which can provide continuous protection for the pipeline and prevent the pipeline from the destructive effects of corrosion. Pipeline painting is one of the most reliable anti-corrosion methods used in industry today.
Types of Pipe Coating
High-Build Epoxy Drinking Water Tank Anticorrosive Paint(FDA)
Polyurea Elastomer Anticorrosive Coating
Internal Drag Reducing Epoxy Anticorrosive Coating
High-build Epoxy Coal Tar Acid and Akali Resistance Paint
Chlorinated Rubber Asphalt Paint
High-build Epoxy Coal Tar Finish
High-build Epoxy Coal Tar Primer
Non-solvent Liquid Epoxy Paint
Solvent-Free Polyurethane Anticorrosive Coating
Coating For Different Pipelines
Process Pipeline
When a new petrochemical plant is built, the processing pipeline is very complicated, with different media and temperatures. Generally, inorganic zinc silicate primer is used as a general anti-corrosion and high-temperature resistant coating. The zinc powder content in the dry film of the inorganic zinc silicate primer is 80%, which can withstand high temperatures of 400°C, and the dry film thickness is 50-75μm. It should not be too thick, otherwise, the coating film will crack due to the cold wall effect of the pipeline. The design of the coating system of the processing pipeline should consider the limitation of working temperature, the difference between insulation and non-insulation, and material/substrate.
Insulation is mainly to prevent energy loss. For the surface of non-insulated pipelines below 120℃, the matching coating system is epoxy/inorganic zinc silicate + epoxy coating paint + aliphatic polyurethane topcoat. Within 120℃, epoxy paint and polyurethane paint can be used. At 120-230℃, acrylic silicone or phenolic epoxy paint can be used. At 200-400°C, inorganic zinc silicate is used. At 400-600℃, organic silicon aluminum paint is the main choice. If the paint on the surface of stainless steel, zinc, or aluminum paint should not be used to avoid galvanic corrosion.
Buried pipeline
The outer wall of the buried pipeline is mainly corroded by the soil. When choosing the anti-corrosion coating, its corrosion characteristics must be considered comprehensively. At present, the corrosion protection of pipelines adopts anti-corrosion coating and cathodic protection. For buried pipelines in petrochemical plants, epoxy asphalt coatings, modified thick-build epoxy coatings, solvent-free phenolic epoxy coatings, polyurethane foam-polyethylene anticorrosive insulation layer are practically used.
Gas pipeline
The internal pipeline coating materials for natural gas pipelines mainly include epoxy powder coatings, liquid epoxy coatings, and phenolic epoxy coating. When the epoxy resin coating is cured, the volume shrinkage is small, the thermal expansion coefficient is small, and the temperature and stress resistance is strong. It is suitable for high-pressure gas pipelines.
Sewage pipeline
The outer wall coating system of steel sewage pipes used an epoxy coal tar two-cloth-five-oil FRP system. New types of anti-corrosive coating systems of buried pipelines commonly use epoxy zinc-rich paint as a primer. Epoxy coal tar mortar paint, modified high build epoxy paint, solvent-free epoxy glass flake, and vinyl ester glass flake paint are for the choice of topcoat. The pipe coating systems has no pinhole defects, needs no glass cloth, has excellent insulation, anti-microbial corrosion, and good chemical resistance. The coating film can reach the required film thickness with one time layer, with the advantages of a simple construction process, low surface treatment cost, and short construction period. The inner wall of the steel pipe can also be matched with the same coating system.
If you want to know more types of industrial paint supplies, please visit our website.
Send product request
Other supplier products
 |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion resistance. It is well-matched with other intermedia... |
 |
FUXI ® FLUOROCARBON PAINT | fluorocarbon coating market fluorocarbon surface technologies and fluorocarbon vs fluorocarbon coated fluorocarbon polymer & surface technol... |
 |
Waterborne Amino-Acrylic Baking Enamel | Waterborne epoxy paintis a baking paint made of water-based resin, high-quality pigments and fillers, additives, water and amino resin. The coating... |
 |
High Build Aliphatic Polyurethane Paint | FUXI® high build vinyl paintis a two-component coating made of aliphatic polyurethane resin, pigments, solvents, additives and curing agents. I... |
 |
High-build Epoxy Coal Tar Primer | High build primer surfaceris formulated with special epoxy resin, coal tar pitch paint, antirust pigment, solvents and additives. It has fast dryin... |
Same products
 |
CUSTOM COLOR SPRAY PAINT (RAL & PANTONE) | Seller: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® custom color aerosol spray paintis made from thermoplastic acrylic resin and the custom ... |
 |
CRYSTAL WAX | Seller: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Crystal Wax Car Polishis a high-quality super deep care crystal emulsion made of advance... |
 |
POLISH WAX | Seller: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® car body wax polish wholesale rejuvenates dull or faded paintwork, restoring it to a dee... |
 |
ACRYLIC SPRAY PAINT | Seller: Shenzhen Sunrise New Energy Co.,Ltd. | As one of the leading aerosol spray paint company, 7CF provides high-preformance Acrylic Spray Pa... |
 |
AEROSOL PAINTS PRODUCTS AND CAR CARE WHOLESALE | Seller: Shenzhen Sunrise New Energy Co.,Ltd. | As one of the leading wholesale spray paint suppliersand car care wholesale suppliers, Shenzhen S... |
