.

Metallurgy grade sintered magnesite with MgO 96% 97% for stainless steel

Dead Burned Magnesite (also known as Dead Burnt Magnesite)

Dead burned magnesite is widely used as a basic refractory material. It is produced in rotary kilns and has purities of 90-97% MgO. It is widely used for gunning/ramming mass for tundish linings and for fettling purposes. Dead burned magnesite can be supplied in lump for users to crush and grade, or in ready-sized form. Common sizings are 5-3mm, 3-1mm, -1mm, -0.5mm and DIN 70.

Magnesite at 1800 ℃ calcination, carbon dioxide completely escape, magnesium oxide periclase formed dense block, weighing burning magnesium (also called sintered magnesite), the dead-burned magnesium has the very high refractoriness. Its main ingredients for magnesium oxide, select natural super magnesite writing flotation purification, light burned, fine grinding, high pressure ball, ultra high temperature oil shaft kiln calcine.

Dead Burned Magnesia

Item Number MgO% L.O.I% SiO2% Fe2O3% Al2O3% CaO% B.Dg/cm3

LMME-98DBM ≥98 ≤0.2 ≤0.5 ≤0.5 / ≤1.2 ≤3.30

LMME-97DBM ≥97 ≤0.2 ≤0.7 ≤0.7 / ≤1.2 ≤3.30

LMME-96DBM ≥96 ≤0.2 ≤1.0 ≤0.9 ≤0.5 ≤1.6 ≤3.27

LMME-93DBM ≥93 ≤0.5 ≤3.0 ≤1.2 ≤0.8 ≤2.0 ≤3.18

LMME-92DBM ≥92 ≤0.5 ≤3.5 ≤1.4 ≤1.0 ≤2.3 ≤3.15

LMME-91DBM ≥91 ≤0.5 ≤3.8 ≤1.5 ≤1.2 ≤2.4 ≤3.15

LMME-90DBM ≥90 ≤0.5 ≤4.0 ≤1.6 ≤1.4 ≤2.5 ≤3.15

LMME-89DBM ≥89 ≤0.7 ≤5.5 ≤2.0 ≤1.6 ≤2.5 ≤3.15

LMME-87DBM ≥87 ≤0.7 ≤7.0 ≤2.0 ≤1.7 ≤3.0 ≤3.10

Size 0-3,0-5mmoraccordingtotherequirementofcustomer



Send product request

To: Liaoning metals&minerals Enterprise Co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Flame retardant grade brucite powder producer in plastics
Flame retardant grade brucite powder producer in plastics Bruicte Item number MgO SiO2 CaO Fe2O3 Al2O3 L.O.I Size LMME-58BRU58% 8% 5% 2.5% 1% 31% 80-325mesh LMME-60BRU60% 7% 4% 2.0% 1% 31% 80...
Metallurgy grade sintered magnesite with MgO 96% 97% for stainless steel
Metallurgy grade sintered magnesite with MgO 96% 97% for stainless steel Dead Burned Magnesite (also known as Dead Burnt Magnesite) Dead burned magnesite is widely used as a basic refractory material. It is produced in ...
High whiteness bulk talcum powder brands manufacturer for papermaking use
High whiteness bulk talcum powder brands manufacturer for papermaking use PAPER GRADE TALC POWDER Technical Data Sheet Item number LMME-PAP92 LMME-PAP90 LMME-PAP88 LMME-PAP88 Whiteness %≥ 92 90 88 88 Dust, mm2/g...
Metallurgy industrial grade wollastonite powder for steel slag
Metallurgy industrial grade wollastonite powder for steel slag Brief description of Our Products Wollastonite:   The formula of Wollastonite is CaSiO3. The ideal chemical specifications are as followed:   SiO2 ...
Natural sculpture engraving carving grade talc lumps and stone
Natural sculpture engraving carving grade talc lumps and stone SCULPTURES (CARVING) TALC LUMP Technical Data Sheet Item number LMME-SCP-PINK LMME-SCP-Grey LMME-SCP-Blue Size 50-300mm 50-300mm 50-300mm ...
All supplier products

Same products

Dental Tooth Materials PEEK R&D Series
Dental Tooth Materials PEEK R&D Series Seller: Jilin Joinature Polymer Co.,Ltd. Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series ...
Grade PF PEEK Pure Resin Fine Powder
Grade PF PEEK Pure Resin Fine Powder Seller: Jilin Joinature Polymer Co.,Ltd. The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns). It can be...
Grade G PEEK Pure Resin Pellets
Grade G PEEK Pure Resin Pellets Seller: Jilin Joinature Polymer Co.,Ltd. With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, e...
Grade GL Glass Filled Fiber Reinforced PEEK
Grade GL Glass Filled Fiber Reinforced PEEK Seller: Jilin Joinature Polymer Co.,Ltd. PEEK-GL series, is a glass fiber composite modified PEEK glassmaterials, currently available from...
Grade FC Super Wear Resistant PEEK
Grade FC Super Wear Resistant PEEK Seller: Jilin Joinature Polymer Co.,Ltd. PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear ...