Anti-Corrosion Powder Coating for Drinking Water Pipes
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Introduction:
This product is formulated using special epoxy resins, dedicated curing agents, and food-grade pigments and fillers. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.
Product Features:
Excellent adhesion to the substrate.
Good leveling and high gloss on the coating surface.
Strong resistance to permeation and corrosion.
High surface hardness and dense coating.
Superior high-temperature cathodic disbondment resistance.
Low melting temperature, high reactivity, and high curing completion rate.
Good mechanical properties and extremely strong flexibility.
Complies with safety evaluation standards for materials in contact with drinking water.
Powder Coating Performance Parameters
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, no lumps | Visual inspection |
| Color | As per customer requirements | ————— |
| Density (g/cm³) | 1.3-1.5 | GB/T 4472 |
| Non-Volatile Content (%) | ≥ 99.4 | GB/T 6554-1986 |
| Magnetic Substance Content (%) | ≤ 0.002 | GB/T 2482-1986 |
Cured Powder Coating Performance Parameters
| Test Item | Technical Indicator | Test Method |
|---|---|---|
| Appearance | Smooth, uniform color, no bubbles, cracks, or pinholes; slight orange peel allowed | Visual inspection |
| Adhesion (Grade) | 1-3 | SY/T 0442-1997 |
| Cathodic Disbondment Resistance (65°C, 48h) (mm) | ≤ 8 | SY/T 0413-95 |
| Flexibility (40) | No cracks | SY/T 0442-1997 |
| Electrical Strength (MV/m) | ≥ 30 | GB/T 1408-1989 |
| Impact Resistance | ≥ 11 | SY/T 0442-1997 |
| Chemical Resistance | Qualified | GB/T 1763-1979 |
| Abrasion Resistance (1000g, 1000 cycles) | ≤ 20g | GB/T 1768-1979 |
| Salt Spray Test (1000h) | No change in coating | GB/T 1771-1991 |
| Flattening Test (Flattening ratio 4/5) | No cracks at welds | CJ/T 120-2008 |
| Water Quality Soaking Test | Qualified | GB/T 17219-1998 |
Compliance Standards: CJ/T 120-2008. GB/T 17219-1998
Application Fields:
Municipal drinking water supply pipes.
Application Processes:
Electrostatic spraying, dip coating, etc.
Precautions:
The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 50-90 mm; dust and abrasives on the steel pipe surface should be blown clean. Preheating temperature should be controlled between 180-230°C.
The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. The stacking height should not exceed four layers. Avoid long-term pressure and ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.
To ensure thorough curing of the epoxy coating and better anti-corrosion performance, it is recommended to preheat the steel pipe surface to above 170°C to improve the curing completion rate.
Do not mix with other anti-corrosion powders or recycled powders. Thoroughly clean the spraying equipment when changing colors to ensure drinking water safety and compliance with health standards.
Send product request
Other supplier products
 |
Kitchen supplies powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Characteristics of powder coatings “It does not contain toxic, solvent free, or v... |
 |
Architectural aluminum powder coating MT-D34 | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-D34 is a series of durable powder coatings specially formulated for the use ... |
 |
Low Cure Powder Coating Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introductio Most powder coating chemistries required relatively high curing tempera... |
 |
Antibacterial powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Made of inorganic antibacterial agent, it has long-term antibacterial properties and is... |
 |
Matte powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-HJ0023 Medium grey matte MT-HJ0022 Purple matte MT-HJ0021 Green matte ... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
