Insulating Powder Coating
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Introduction:
High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements for general enameled wire and electronic component encapsulation.
Capable of rapid low-temperature curing and can also utilize residual heat curing (for heat-resistant components).
Excellent adhesion and flexibility, with good moisture resistance, anti-aging properties, thermal stability, flame retardancy, and adjustable color options.
Edge coverage greater than 30%, with a breakdown voltage greater than 40KV/mm.
Resistant to heat, wear, water, acids, alkalis, and salts; the coating is continuous and smooth, with a very dense texture.
For large and heavy components, fluidized bed preheating and residual heat curing are recommended.
Product Parameters
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, loose without lumps, dry powder flowability 120-140 mm | Visual inspection |
| Color | As per customer requirements | Combination of colorimeter and visual inspection |
| Adhesion | Cross-cut test (ISO 2409. GB/T 9286-1998) | 0 level, excellent |
| Impact Resistance | Impact tester (drop weight method) (ISO 6272. GB/T 1732-1993) | Good performance at 50 kg.cm |
| Flexibility | Bending test instrument (ISO 1519. GB 6742-1986) | 3 mm, excellent flexibility |
| Cupping Test | ISO 1520. GB/T 9753-1993 | Pass at 8 mm |
| Surface Hardness | Pencil hardness (Mitsubishi pencil) (ASTM D3363. GB/T 6739-1996) | 1H |
| Electrical Insulation | Breakdown voltage greater than 40KV/mm | Excellent |
| Humidity Resistance | ISO 6270. GB/T 1740-1979 | Over 1000 hours |
| Salt Spray Test | ISO 7253. GB/T 1771-1991 | Over 1000 hours |
Application Fields:
Motor casings
Motor stators and rotors
Instruments
Small transformers
Electronic components
Send product request
Other supplier products
 |
Imitation Anodizing Coating Series | Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gloss aesthetic ... |
|
|
Metallic flat semi-gloss MT-049/97003 | Introduction No. MT-049/97003 Color Metallic color Surface Metallic flat semi-gloss System Weather-resistant polyeste... |
 |
Flat matte MT-04913704 | Introduction No. MT-049/13704 Color Signal white Surface Flat matte System Polyester/049 Scope of application F... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, ... |
 |
Powder coating for aluminum profiles | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description This series of products is based on saturated hydroxyl polyester re... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
