Hyper-durable powder coatings MT- D3020 Gen II
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT- D3020Gen II is a series of hyper-durable powder coatings designed to meet the requirements of AAMA2605. the most demanding architectural specification in the world. MT- D3020Gen II technology uses innovative fluorocarbon polymer chemistry that is designed to provide maximum gloss and colour retention in service. MT- D3020Gen II is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognised benefits of powder coatings. MT- D3020Gen II is a technically and environmentally benign alternative to liquid PVF2 systems. MT- D3020Gen II is available in a selected range of colours and pearlescent effects and in a subtle low sheen finish.
Powder Properties
| Appearance | Smooth Matt |
| Gloss level | 20 – 30 gloss units (60°) |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 6 months |
| Sales code | 8 series |
| Stoving Schedule |
30 - 40 minutes at 190°C or 20 - 30 minutes at 200°C or 15 - 25 minutes at 210°C (object temperature) Do not cure above 210°C |
Mechanical Tests
| Dry Adhesion | AAMA2605 8.4 | Pass – no removal of film |
| Impact Resistance | AAMA2605 8.5 | Pass - no tape removal of film from substrate following 3mm deformation |
| Dry Film Hardness | ISO2815 (Buchholz) | Pass |
| Abrasion Resistance | AAMA2605-13 8.6 | Pass – abrasion coefficient >40 |
Pre-treatment
For maximum protection it is essential to pre-treat components prior to the application of MT- D3020 Gen II in accordance with the MT-D Approved Applicator Manual. Aluminium components must receive a full multi-stage chromate conversion coating or suitable chrome-free pre treatment to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier.
Application - Cleanup
Below are some recommendations for minimising the risk of cross contamination of MT-D3020 Gen II with powders based on other chemistries such as polyester:
If possible, use a dedicated spray to waste booth if not reclaiming.
Ensure thorough cleaning of spray booth, duct work, cyclone (if within system) and all powder application equipment (guns, hoses, pumps, hoppers, etc) before and after applying MT-D3020 powders.
Clean wet rags should be used for a final wipe down on the inside of the booth and feed hopper.
When returning to application of polyester powders after a MT-D3020 run, shoot foam blocks through hoses and flush guns with next powder to remove any traces of fluorocarbon, and spray this powder to waste before reclaiming.
If reclaiming powder after MT-D3020 run, check reclaim powder for contamination before reuse.
Where possible isolate the application of MT-D3020 from other production eg. use at weekends or on night shift when no other production is taking place.
Operators should wear dedicated protective clothes for MT-D3020 application. At other times, these should be stored in sealed containers.
MT-D3020 can be stored along with other powder so long as it is in sealed containers.
Send product request
Other supplier products
 |
High-Purity Krypton | WA：+86 132 6275 2056 WEB: std-coatings.com Product Details Product Names High-Purity Krypton Pure Krypton Krypton Purity High-Purity Kryp... |
 |
Hammertone Powder Coating Manufacturer | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction We are a leading powder coating manufacturer specializing in Hammerton... |
 |
Ethylenediaminetetraacetic acid CAS No.60-00-4 | WA：+86 132 6275 2056 |
 |
Glossy and Bright Yellow Powder Coating | Introduction High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance perform... |
 |
Flat matte MT-049/14900 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/14900 Color White Surface Flat matte System Po... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
