Polyester Powder Coating
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Introduction:
This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding curing agents, pigments, fillers, and other specialized additives. It features excellent weather resistance, UV resistance, and thermal stability.
Product Usage:
Suitable for highway guardrails, equipment, outdoor decoration, installations, architectural windows and doors, hardware tools, home appliances, motorcycle and bicycle parts, automotive components, aluminum profiles, electrical cabinets, boxes, and various outdoor metal decorative protections.
Powder Performance:
| Property | Specification | Notes |
|---|
| Gloss |
Referenced to GB1734-79 standard |
Measured with a 60° glossmeter |
| Mechanical Properties |
Referenced to CB1727-92 standard |
Film thickness 60-90um, tested under laboratory conditions |
| Curing Conditions |
Referenced to workpiece temperature |
Deviations in temperature may affect performance |
Coating Appearance:
| Property | Specification | Notes |
|---|
| Gloss |
Referenced to GB1734-79 standard |
Measured with a 60° glossmeter |
Mechanical Properties:
| Property | Specification | Notes |
|---|
| Standard |
CB1727-92 |
Film thickness 60-90um, tested under laboratory conditions |
Curing Conditions:
| Property | Specification | Notes |
|---|
| Temperature |
Referenced to workpiece temperature |
Deviations may affect performance |
Application Parameters:
| Parameter | Specification | Notes |
|---|
| Applicable Equipment |
Frictional charging spray, corona electrostatic spray, electrostatic fluidized bed |
|
| Film Thickness |
60-120um |
Adjustable according to workpiece requirements |
| Coverage Rate |
8-11㎡/kg |
For a film thickness of 60um, depending on type and workpiece requirements |
| Calculation Formula |
Specific gravity × film thickness = grams per square meter |
|
Storage Period:
| Condition | Specification | Notes |
|---|
| Temperature |
Below 30°C |
Dry conditions |
| Duration |
12 months |
|
| Re-sealing |
Immediately after use |
To prevent moisture absorption |
| Packaging |
20kg paper boxes with an inner plastic liner |
Minimum packaging 3kg |
Health and Safety:
| Property | Specification | Notes |
|---|
| Toxicity |
Non-toxic |
|
| Flammability |
Non-flammable |
|
| Regulation |
GB15607-1995 |
Coating operation safety regulations |
Precautions:
| Item | Specification | Notes |
|---|
| Mixing Powders |
Do not mix different types |
|
| Interference |
High interference; thoroughly clean equipment and site when changing types |
|
| Durability Enhancement |
Use a clear polyester coating as a protective layer for enhanced durability |
Other supplier products
All supplier products
Same products
