MT-A200 Series
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Overview:
Epoxy polyester powder coating series designed for automobile engine blocks, suspension systems, filters, springs and other parts.
Coating characteristics:
-Good adhesion
-Good mechanical properties
-Excellent corrosion resistance
Application:
Suitable for various types of engines, suspension parts, filters and other automobile parts.
Application parameters:
Curing time: 180℃～200℃×10～15 minutesSpraying method: high voltage electrostatic spraying 60～80KVRecommended film thickness: 60～150um
Physical properties:
| Project | Instrument | Judgment standard | Test standard |
| Pencil hardness | Pencil hardness tester | ≥1H | ASTM D 3363
GB/T 6739 |
| Impact resistance | Impact tester | 50kg.cm(8mm diameter) 2.5Nm (16mm diameter) (20mm diameter) |
GB/T 1732 |
| ASTMD2794 | |||
| ISO 6272 | |||
| Bending resistance | Bending tester | ≤2mm (cylindrical shaft) Conical shaft bending Cylindrical shaft |
GB/T 6742 |
| ASTM D 1737 | |||
| ISO 1519 | |||
| Adhesion | Hundred grid test | Grade 0 | GB/T 9286 |
| ISO 2409 | |||
| ASTM D 3359 | |||
| Cupping | Cupping tester | ≥6mm | GB/T 9753 ISO 1520 |
| Salt spray resistance | NSS salt spray | ≥500H,Wb≤2mm | GB/T 1771 |
| ASTM B-117 | |||
| ISO 7253 | |||
| Moisture and heat resistance | Constant temperature and humidity chamber | ≥1000H slight gloss loss | GB/T 1740 ISO 6270 |
The above tests are all conducted on 0.8mm degreased and rusted cold-rolled steel plates, with a coating thickness of 60-80um. The performance indicators of the coating will vary slightly with the gloss.
Environmental protection requirements:This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, and other heavy metals, and fully complies with RoHS2.0 environmental protection requirements.
Note:We will provide complete powder coating consultation and application customization solutions based on the actual needs of each customer. The test indicators mentioned in this report are all laboratory test data for reference only and are not intended as performance commitments for product applications. The results may vary depending on environmental factors and other conditions.
Send product request
Other supplier products
 |
Valve Powder Coating | Characteristics of Valves Valves typically have the following characteristics: Thick and uneven walls Irregular shapes Rough surfaces High the... |
 |
White Powder Varnish Vecodur VPPA White | Product Information – VECODUR VPPA White AttributeDetails Product Form Powder Description Powder for electrostatic applica... |
|
|
Metallic plane MT-629/93601 | Introduction No. MT-629/93601 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci... |
 |
ACE Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com CategoryDetails Environmental – Zero VOC emissions– Over 95% overspray... |
|
|
One-component polyurethane moisture curing primer MT-85B | Product Description MT-85B one-component primer is a one-component polyurethane primer. MT-85B one-component primer cures by reacting in moist air... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
