ANODIZED POWDER COATING
Getaquote
whats/app:+86 132 6275 2056
WEB: std-coatings.com
It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach.
PRODUCT FEATURES
Coating characteristics:
Good adhesion, excellent mechanical properties,tough coating film.
Coating film is Smooth and glossy
Good outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for a variety of outdoor productsdecoration and protection, such as: aluminum curtain wall, door and window frame,ceiling, etc
Spraying method:
high voltage electrostatic sprayin60-80KV
Recommended filmthickness:
60-80 um
Application parameters
Curing time
200Cx10–15mins
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of .the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re -examined to be in good condition evenif it isfound to be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
Send product request
Other supplier products
| Sand Texture Matt POWDER COATING MT-049/13705 | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/13705 Color Traffic White Surface Sand Texture Matt Sy... | |
| Valve Powder Coating | Characteristics of Valves Valves typically have the following characteristics: Thick and uneven walls Irregular shapes Rough surfaces High the... | |
| Marble Effect Powder Coatings manufacturer | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction Marble effect powder coating is a high-decorative finish that utilizes... | |
| Orange grain high gloss MT-0497B838 | Introduction No. MT-049/7B838 Color White Surface Orange grain high gloss System Polyester Scope of application Lig... | |
| Polyester based powder coating MT-MA010G White | WA:+86 132 6275 2056 WEB: std-coatings.com Product Description MT-MA010G is a polyester based powder coating, formulated without TGIC and is d... |
Same products
| Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... | |
| Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... | |
| Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... | |
| Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... | |
| Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |












