Dark Gray Sand Texture Powder Coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
| Description | Powder coating | |
| Another Name | Powder paint,Electrostatic powder coating,thermosetting powder coating | |
| Type | Epoxy polyester resin series | |
| Main Material | Epoxy resin,polyester resin, and hardner | |
| Advantage | Good adhesion,good mechanical property,strong coating film, | |
| excellent insulation,anticorrosion,energy-efficient,convenient operation. | ||
| Application Field | Apply to indoor use | |
| Household appliance:air conditioner indoor unit,fan,radiator, | ||
| kettle,lighting sets, refrigerator,TV set,kitchen ventilator, | ||
| disinfection cabinet,electric cooker,etc. | ||
| Daily use:Knife,fork,crafts,ornament,etc. | ||
| Indoor furniture:table,chair,cupboard, | ||
| safe,carved iron bed,door,curtain,etc. | ||
| Application Condition | Electrostatic spray/Triboelectric gun spray. | |
| Recommended curing condition:190℃/15min | ||
| (object surface temperature),range from 190 degree centigrade | ||
| for 20 minutes to 210 degree centigrade for 8minutes. | ||
| Recommended film thickness:50~80um, range from 40~150um | ||
| Physical Property | Specific gravity | 1.4~1.8g/cm3 as per formula and color |
| Particle size | average 35~40um | |
| Test Condition | Substrate | 0.5mm thickness cold rolled steel sheet |
| Pretreatment | Remove rust and grease | |
| Film thickness | 50~80um | |
| Curing temperature | 190℃/15min | |
| Mechanical Property | Pencil hardness | ISO 15184-1998:Null |
| Adhesion (by griding) | GB/T 9286-1998:≤2 grade | |
| Impact test | GB/T 1732-1993:≥25 kg.cm | |
| Bending test | GB/T 6742 :≤4mm | |
| Cupping test | GB/T 9753:Null | |
| Chemical and Durability Test | Salt spray test | GB/T 1771.≥500 hours,no obvious change , |
| crossion width at cross≤2mm | ||
| Humidity test | GB/T 1740.≥500 hours,no change | |
| Package | Inside by PEbag,outside by carton,net weight 25kg/carton | |
| Storage Condition | Store in dry ventilated room,temperature under 35 degree centigrade, | |
| avoid direct sunlight. | ||
| Shelf Life | Six months | |
| Health and Safty | Raw material of powder coating don't contain toxic substance, | |
| no toxic gas produced during curing.Please wear dust mask in operation | ||
| to avoid inhelation of powder.Please avoide prolonged skin contact | ||
| with powder,wash out powder with soap and water. | ||
Send product request
Other supplier products
 |
Metallic flat matte MT-629/94810 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-629/94810 Color White Surface Metallic flat matte S... |
 |
White series powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Silver gray powder coating MT – PMS0007 White pearl powder coating MT – PM... |
 |
Imitation Anodizing Coating Series | Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gloss aesthetic ... |
 |
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is formulated using epoxy resin and phenolic epoxy resin, design... |
 |
Pure polyester transparent powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description This series of products is made of polyester resin and hardener, an... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
