Antistatic powder coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Introduction
Introduction:
Made of antistatic materials, suitable for indoor and outdoor environments
Features:
The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.
It can resist static electricity for a long time.
Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.
Application parameters:
Curing time:200℃×10–15 minutes
Spraying method:High voltage electrostatic spraying 60-80 KV
Recommended film thickness:60-80 um
Physical properties:
| Item | Instrument | Standard | Test method |
| Pencil hardness | Pencil hardness tester | ≥ H | GB/6739 |
| Impact resistance | Impact tester | ≥ 50 kg.cm | GB/T 1732 |
| Bending resistance | Bending tester | ≤ 2mm | GB/T 6742 |
| Adhesion | 100 grid test | Level 0 | GB/T 9286 |
| Cup protrusion | Cup protrusion tester | ≥ 6 mm | GB/T9753 |
| Chemical properties: | |||
| Salt spray resistance | ≥ 500 Hs | ≥ 9 levels | GB/T 1771 |
| Moisture and heat resistance | ≥ 1000 Hs | Slight gloss loss | GB/T 1740 |
| Weather resistance (outdoor products) | Artificial accelerated aging QUV-B313 240h | ≥ 3 levels | GB/T 1865 |
The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.
This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.
Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.
Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.
Send product request
Other supplier products
 |
Household electrical appliances powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Characteristics of powder coatings “It does not contain toxic, solvent free, or v... |
 |
Polyester based powder coating MT-MA220G White | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-MA220G is a polyester based powder coating, formulated without TGIC and is d... |
 |
Pure polyester/TGIC powder coating Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description This series of products uses saturated polyester resin and TGIC... |
 |
elevators Powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description Powder coating for elevators has excellent decorative appearance, a... |
 |
Metallic flat matte MT-049/96190 | Introduction No. MT-049/96190 Color Metallic color Surface Metallic flat matte System Polyester Scope of applica... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
