Polyester based powder coating White
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-OA010G is a polyester based powder coating, formulated without TGIC.
Powder Properties
| Chemical type | Polyester TGIC-free |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.54-1.64 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 7.8 ㎡/kg @ 75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
10 minutes @ 200°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | Lightweight Zinc phosphate |
| Film Thickness | 70 – 80 microns |
| Stoving Schedule | 10 minutes at 200°C |
Mechanical Tests
| test | results | |
| Flexibility | ISO6860 | 5mm |
| Erichsen cupping | ISO1520 | 6mm |
| Adhesion | ISO2409 | 100% |
| Impact (dir/rev) | ISO 6272 | 30/30 kgcm |
| Gloss(@60°） | ISO 2813 | >90 |
| Hardness(Buchholz) | ISO2815 | >80 |
| Reflectance Class | DIN EN 16268 | A |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-OA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-OA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Send product request
Other supplier products
 |
MDF (Medium density fiberboard) powder coating | Introduction Due to the good application prospects and advantages of MDF powder coating technology itself (see attached table), it has long been o... |
 |
Polyurethane primer powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description The one-component primer can improve the surface condition of t... |
 |
High Gloss Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction high-gloss powder coating is an environmentally friendly finishing materia... |
 |
MT-PZ ALZ55N Powder coating primer containing zinc | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-PZ is a powder coating primer containing zinc which is desig... |
 |
Weather-resistant powder coatings manufacturer | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Product description: This series of products uses saturated polyest... |
Same products
 |
Flat matte POWDER COATING MT-049/14900 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/14900 Color White S... |
 |
Sand grain POWDER COATING MT-059/60858 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-059/60858 Color Red ink (... |
 |
Sand grain metal POWDER COATING MT-049/77578 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/77578 Color Xuanyou ... |
 |
Flat metal POWDER COATING MT-049/94947 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/94947 Color Luanhua ... |
 |
Flat Metallic Powder Coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Brand： STD Color R... |
