Polyester based powder coating MT-MA010G White Manufacturer
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-MA010G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish.
Powder Properties
| Chemical type | Polyester TGIC-free |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.72 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 7.8 ㎡/kg @75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
10 – 15 minutes @ 205°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 10 minutes at 200°C |
Mechanical Tests
| test | results | |
| Flexibility | ASTM D522 | 3mm |
| Adhesion | ASTM D3359 | 100% |
| Impact (direct | ASTM D2794 | 160/160 kgcm |
| Gloss(@60°） | ISO 2813 | >90 |
| Hardness (scratch) | ASTM D3363 | H |
| Reflectance Class | DIN EN 16268 | A |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-MA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-MA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Send product request
Other supplier products
 |
Flat matte MT-049/7B556 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/7B556 Color Gray Surface Flat matte System Pol... |
 |
elevators Powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description Powder coating for elevators has excellent decorative appearance, a... |
 |
Flat matte MT-6297A549 | Introduction No. MT-629/7A549 Color Gray Surface Flat matte System Super weather-resistant polyester Scope of ap... |
 |
High Gloss Powder Coatings manufacturer | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction high-gloss powder coating is an environmentally friendly finishing mat... |
 |
Black Wrinkle Color Powder Coating | Introduction As one of the most experienced powder coaters in the industry, Standard boasts a large and loyal clientele that spans a wide range of... |
Same products
 |
Flat matte POWDER COATING MT-049/14900 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/14900 Color White S... |
 |
Sand grain POWDER COATING MT-059/60858 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-059/60858 Color Red ink (... |
 |
Sand grain metal POWDER COATING MT-049/77578 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/77578 Color Xuanyou ... |
 |
Flat metal POWDER COATING MT-049/94947 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/94947 Color Luanhua ... |
 |
Flat Metallic Powder Coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Brand： STD Color R... |
