MT-800 AM High durability powder coatings
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements.MT-800 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder Properties
| Chemical Type | PolyesterTGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.2-1.7 g/cm³ depending on colour and effect |
| Storage | Dry cool conditions below 25°C |
| Shelf Life | 12 months |
| Stoving Conditions
(at object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Mechanical Tests
| Adhesion (2mm Crosshatch) | ISO2409 | Gt 0 |
| Erichsen Cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Impact | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
Pre-treatment
For maximum protection it is essential to pretreat components for exterior use prior to the application of MT-800. Aluminium components should receive a full multi-stage chromate conversion coating to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier. Galvanised steel also requires multi-stage pretreatment using either zinc phosphate or chromate conversion. Degassing of galvanised steel prior to powder application is considered mandatory – follow the procedural advice of the pretreatment supplier. MT-800 products may also be used on other substrates (eg. mild steel fabrications) for internal applications; nevertheless zinc phosphate pretreatment is regarded as essential.
Application
MT-800 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Send product request
Other supplier products
 |
Aromatic Solvent STD-P-2600 | Introduction ProductName：Aromatic Solvent STD-P-2600CAS No.：64742-94-5H.S. Code：27075000 Specification Item Specifications TestMethod ... |
 |
Light gray flash silver powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Key attributes MainMaterial Saturatedpolyesterresin,epoxyresin SurfaceType Gloss,s... |
 |
Rose Red Glossy Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Powder type Epoxy, Epoxy-Polyester, Polyester, Polyurethane Applications Exterior Indus... |
 |
Sports equipment powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Patterned Powder Coating – Custom Manufacturer | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com We are a professional powder coating manufacturer in China, specializing in custom patt... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
