Silicone fluid（MT6000 ）
Introduction
PRODUCT DESCRIPTION
MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.
APPLICATIONS
• Thermostatic fluids (-50°C – 200°C)
• Dielectric fluids (impregnation of paper for condensers)
• Anti-blotting products for photocopying machines.
• Thinning and plastifying agents for RTV’s and silicone sealants.
• Lubricating and heat protecting agents for textile threads (synthetic sewing threads)
• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
• Water repellent treatment:
– of powders ( for paints and plastics)
– of fibres : glass fibres
• Release agents (mould release for plastics and metal castings)
• Surfactants for styrene-butadiene foam.
Typical Properties
• Very good resistance to high and low temperatures
• Good combustion resistance
• Good dielectric properties
• Low surface tension
• High compressibility
• Absence of ageing upon exposure to atmospheric agents
• Good oxidation resistance
• Little change in viscosity with temperature
• Good resistance to high and prolonged shear stress
STORAGE AND HANDLING
When stored in the original unopened packaging at a temperature of between –20°C and 50°C, MT6000 may be stored for up to 2 years from its date of manufacture (expiry date). Comply with storage instructions and expiry date marked on the packaging.and recommendations made by material safety datasheet be observed at all times.
PRODUCT SAFETY
The Safety Data Sheet (SDS) should always be read and completely understood prior to the handling of any chemical product. It is important that adequate safety procedures are followed by the user. Information on the toxicity, environmental and industrial hygiene aspects of products may be found in the SDS.
Send product request
Other supplier products
 |
PTFE powder coating | Product introduction Polytetrafluoroethylene (PTFE), commonly known as “the king of plastics”, is a polymer compound formed by the pol... |
 |
Composite materials – modified silane sealant | MT-667is a single component sealant based on silane modified polymer, which solidifies into an elastomer by reacting with moisture and has good adh... |
 |
PVF oil pipe coating | Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi... |
 |
Dispersants STD-58685N | Introduction Composition: Organic copolymer solution with pigment-friendly groups Appearance: yellow transparent solution Active ingredient: 50%... |
 |
CAS 98-95-3 Nitrobenzene | Introduction Chemical Name: NitrobenzeneCAS Registration Number: 98-95-3 Product Specifications: Appearance Light yellow liquid Mass... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
