CBS (CZ) CAS 95-33-0 N-cyclohexylbenzothiazole-2-sulphenamide
Introduction
Chemical Name:N- cyclohexylbenzothiazole- 2- sulfenamide
CAS NO.:95-33-0
Product Specification:
| Appearance | Grayish white to yellowish powder or particle | |
| Purity,% | ≥ | 96.0 |
| Melting Point(Initial),°C | ≥ | 97.0 |
| Heat Loss,% | ≤ | 0.40 |
| Ash,% | ≤ | 0.30 |
| Residue on sieve(150μm),% | ≤ | — |
| Insoluble in methanol,% | ≤ | 0.50 |
| Free amine,% | ≤ | 0.50 |
◆Performance:Siceler CBS is kind of rapid retard sulfonamides accelerator with excellent scorch resistance, safe processing and rapid curing speed. Alkaline accelerator such as thiuram and Sulphide carbamate could enhance its activities.
◆Application:Siceler CBS is mainly used for manufacturing industrial rubber products such as tires, cables, rubber hoses, rubber shoes, etc.
◆Packaging:Paper/plastic packages with a net weight of 25kg per package.Or FIBC with a net weight 500kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine, rain and long-term extrusion,keeping away from hot source.
95-33-0 –Physico-chemical Properties
| Molecular Formula | C13H16N2S2 |
| Molar Mass | 264.41 |
| Density | 1.31~1.34g/cm3 |
| Melting Point | 93-100°C |
| Boling Point | 410.4±28.0 °C(Predicted) |
| Flash Point | 202°C |
| Water Solubility | Insoluble |
| Solubility | Chloroform (Slightly), DMSO (Slightly), Ethyl Acetatae (Slightly) |
| Vapor Presure | 6.04E-07mmHg at 25°C |
| Appearance | Form Solid, color Pale Yellow to Light Beige |
| Color | Pale Yellow to Light Beige |
| pKa | 0.59±0.10(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5700 (estimate) |
| Physical and Chemical Properties | Melting point 93-100°C water-soluble Insoluble |
| Use | Is an excellent after-effect accelerator, suitable for natural rubber and synthetic rubber and tire and other rubber products |
Send product request
Other supplier products
 |
MS modified silane sealant | Introduction Modified silane sealant, environmentally friendly, has a wide range of adhesive properties, no need for primer, UV protection, no sol... |
 |
Substrate wetting additive STD-249 | Introduction Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Scope ... |
 |
CAS 98327-87-8 | BINAP 1.1′-Binaphthyl-2.2′-diphemyl phosphine CAS 98327-87-8 Product Number B2383 Purity / Analysis Method >97.0%(GC) ... |
 |
Rheology modifier STD-9048 | Composition: water-soluble polymers containing hydrophobic groups Appearance: light yellow slightly turbid viscous liquid Active ingredient: 18% ... |
 |
Industrial formaldehyde | Introduction Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03. also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
