Insulated Male Disconnects
The optical isolation terminal has the advantages of low signal loss at the control end, high switching frequency, no mechanical contact jitter, no wear switching, high insulation voltage, no vibration, no positional influence, and long life. Therefore, male disconnect terminal is widely used in the field of automatic control. Main Usage of Insulated Male Disconnects Male disconnects terminal is a kind of accessory product used to realize electrical connection, which is divided into connector category in industry. The male quick disconnect terminal is used to facilitate the connection of the wire. It is actually a piece of metal enclosed in insulating plastic, with holes at both ends for inserting wires, and screws for fastening or loosening. For example, two wires need to be connected sometimes, and sometimes they need to be disconnected. At this time, insulated male spade terminals can be connected with terminals and disconnected at any time without welding or twisting them together, which is very convenient and quick. Information of Insulated Male Disconnects Insulated Female Disconnects Maxium electrical rating: 300volts Maxium temperature: 75℃ Terminal Body: Brass Plating: Tin Insulation material of insulated male disconnect: vinyl Technical Specification of Insulated Male Disconnects Item NO. Mema Tab Thickness of material Dimension Section size(MM²) (mm) (mm) B(mm) dφ(mm) Dφ(mm) L(mm) H(mm) Cable size0.5~1.5mm2(A.W.G. 22~16) Max current:Imax=10A MDD1.25-110(8) 0.8×2.8 0.8 2.8 1.7 4.3 17.7 10 0.5~1.5mm² (22~16):Imax=10A MDD1.25-187(5) 0.5×4.75 0.5 4.75 1.7 4.3 20 MDD1.25-187(8) 0.8×4.75 0.8 4.75 1.7 4.3 18.5 MDD1.25-250 0.8×6.35 0.4 6.35 1.7 4.3 21 Cable size1.5~2.5mm2(A.W.G. 16~14) Max current:Imax=15A MDD2-187(5) 0.5×4.75 0.5 4.75 2.3 4.3 20 10 1.5~2.5mm² (16~14):Imax=15A MDD2-187(8) 0.8×4.75 0.8 4.75 2.3 4.3 18.5 MDD2-250 0.8×6.35 0.4 6.35 2.3 4.3 21 Cable size4~6mm2(A.W.G. 12~10) Max current:Imax=24A MDD5.5-250 0.8×6.35 0.4 6.35 3.4 5.7 25 14 4~6mm² (12~10):Imax=24A Hont Electrical Co Ltd. was founded in 1997, is mainly responsible for the production and sale of nylon tie and other cable accessories products, factory area 45,000 square meters, annual exports of more than 30 million U.S. dollars, Hont cable tie is now sold to 140 countries and regions, already cooperated with EU NA SA country's major cable tie dealers and cooperation time of more than 10 years.
Other supplier products
All supplier products
Same products
|
Aluminum Conductor Steel Reinforced (ACSR) |
Seller: HENAN HONREY CABLE CO.,LTD |
Steel - cored aluminium stranded wire, it could also be described as ACSR Conductor or ACSR Alumi... |
|
Aluminum Conductor Alloy Reinforced (ACAR) |
Seller: HENAN HONREY CABLE CO.,LTD |
As a kind of energy saving conductor, aluminium alloy core stranded wire is mainly used for power... |
|
Aluminum Clad Steel Wire (ACS) |
Seller: HENAN HONREY CABLE CO.,LTD |
Aluminum clad steel wire, also known as acs conductor, can be used for ground wire and conductor ... |
|
Aluminum Clad Steel Reinforced (ACSR/AW Conductor) |
Seller: HENAN HONREY CABLE CO.,LTD |
Aluminum clad steel core aluminum stranded wire is mainly used for overhead lines, compared with ... |
|
Aluminum Alloy Conductor Steel Reinforced (AACSR) |
Seller: HENAN HONREY CABLE CO.,LTD |
Steel core aluminum alloy stranded wire is mainly used in long-span overhead transmission lines, ... |