Dichroic Filter

Hyperion's optical design manufacturingcapabilities span across the spectrum. From UV, VIS, to IR, we fabricate custom optical components that meet unique and specialized application requirements. Our quick turnaround is a compelling advantage for Low Rate Initial Production (LRIP) projects.

Hyperion Optics’s complete range of cost effective dichroic filterrange offers superior transmission, reflection and absorption characteristics.

Key Features:

Sharp transition from reflection to transmission

High transmission in pass band

Hard coatings and no adhesives for long filter life span

All dielectric coated with IBS technology

Factory Standard – Contact us for manufacturing limit or custom specifications

Angle of Incidence: 45.0°

Shortpass Type Transmittance: Tabs>85%

Dimensions: 25.2mm*35.6mm*1.1 mm

Clear Aperture: >95%

Operating Temperature: -45°C ~ 85°C

Physical Durability: MIL-C-48497A

Longpass Type Transmittance: Tabs>90%

Reflection Band: Rabs>98%

Thickness Tolerance: ±0.1 mm

Transmitted Wavefront: 1/4λRMS@633nm (per inch)

Environmental Durability: MIL-STD-810F

Substrate: UV Grade Fused Silica

Dichroic optical filters consist of thin film dielectric coatings on glass and exhibit sharp transitions between transmitted and reflected wavelengths. Dichroic filters are similar to traditional interference filters but differentiate themselves by reflecting all unwanted wavelengths. Consequently our dichroic range also offers minimal absorbance characteristics.

Our dichroic filters are available in longpass, shortpass, bandpass, bandblocking and colour correction types over a range of wavelengths. Dichroic shortpass and longpass filters can also act as hot and cold mirrors respectively.

Dichroic filters can divide natural light from a certain wavelength into two parts, one of which passes through, and the other is reflected or absorbed. Filters that allow longer wavelengths of light to pass through are referred to as long wave pass filters, and filters that allow shorter wavelengths of light to pass through are referred to as short wave pass filters.

The desired spectral range can be achieved by using different dichroic filters.

Other supplier products

	Telecentric Lenses	In many machine-vision systems, such as those used in semiconductor inspection, precise repeatable measurements must be made consistently. To ensur...
	Beam Expander	Beam Expander Leave A Message! Beam expansion Laser beam expansionor reduction is a common application requirement in most labs using lasers or ...
	Magnesium Fluoride Lenses	CVD magnesium fluoride (MgF2-CVD) has good mechanical properties, chemical stability, impact resistance, great anti thermal fluctuations and radiat...
	Rod and Cone Lenses	Rod lenses’optical performance is similar to cylindrical lenses, incident collimated light passes through the polished circumference of the r...
	Barium Fluoride Lenses	Hyperion Optics is a premium full-service photonics supplier. Our optical assembly manufacturingcapabilities span across the spectrum. From UV, VIS...

All supplier products

Same products

	Coating Witness Samples	Seller: Changchun Long Ze Precision Optics Co., Ltd	Coating Witness Samplesis measurement of coating stresses on substrates. Often the material is th...
	Ball Lensed Fiber	Seller: SHENZHEN PHOTONSTREAM LIMITED	Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin...
	Angle Polished Lensed Fiber	Seller: SHENZHEN PHOTONSTREAM LIMITED	The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully...
	976nm 350W Fiber Coupled Laser Diode	Seller: SHENZHEN PHOTONSTREAM LIMITED	976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ...
	940nm Fiber Coupled Laser Diode	Seller: SHENZHEN PHOTONSTREAM LIMITED	940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ...