CEX WDM

T&S Cex-WDM is a kind of coexistence WDM product, which is mainly used in optical fiber access network. It can use EPON/GPON network of 1 to 2.5Gbps and XG-PON network of 10Gbps rate in the same ODN. , And even use NG-PON2 network with a rate of 10 to 40Gbps; using Cex-WDM can save a lot of ODN capital investment at the access network level.

Features of Cex WDM

Automatic Optical alignment

Bi-directional

Optical path epoxy free

Low insertion loss & high Isolation;

Thin Film Filter Technology

RoHS compliant

Applications of Cex WDM

T&S’ CEx-wdm Series is designed for Next Generation Passive Optical Networks (NG-PON), a new optical access system that coexists with GPON on the same ODN. Our CEx-wdm Modules, including GPON, XG-PON, NG-PON2 and OTDR, are designed to accommodate NG-PON1 and NG-PON2 TWDM wavelengths to maximize the density and enhance the speed of optical distribution network.

Specifications of Cex WDM

Parameters		Unit	Specification
Operating Wavelength Range		nm	1260～1660
GPON Bands	Operating Wavelength	nm	1290～1330 & 1480～1500
	Insertion Loss*	dB	≤1.0
	Isolation@XG-PON bands&NG-PON2bands&OTDR bands	dB	≥35
XG-PON Bands	Operating Wavelength	nm	1260～1280 & 1575～1581
	Insertion Loss*	dB	≤1.6
	Isolation@GPON bands&NG-PON2bands&OTDR bands	dB	≥35
NG-PON2 Bands	Operating Wavelength	nm	1524～1544 &1596～1625
	Insertion Loss*	dB	≤1.8
	Isolation@GPON bands&XG-PON bands&OTDR bands	dB	≥40
OTDR Bands	Operating Wavelength	nm	1640～1660
	Insertion Loss*	dB	≤2.2
	Isolation@GPON bands&XG-PON bands&NG-PON2 bands	dB	≥35
Pass Channel Ripple		dB	≤0.3
Return Loss		dB	≥45
Directivity		dB	≥45
Polarization Dependent Loss		dB	≤0.2
Polarization Mode Dispersion		Ps	≤0.2
Power handling		mW	≥300
Fiber Type		/	Customer specified
Fiber Length		m
Connector Type		/	Customer specified
Operating Temperature		℃	-5~+70
Storage Temperature		℃	-40～+85
Package Dimension		mm	L100 x W80 x H10 ABS Box or L60 x W50 x H8 Metal Box

Note:

• Insertion loss excluding connector loss.

• Customized dimension is available.

As a professional wdm provider, T&S provides various kinds of high-quality optical communications products.

Other supplier products

	Reason Analysis of Using AOC Active Optical Cable in Data Center Wiring	40G/100G AOC active optical cable has been globally introduced throughout the aoc data centerfield. Compared to 40G DAC copper cable, 40G AOC activ...
	MTP/MPO LOOPBACK	T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b...
	100G QSFP28 DIRECT ATTACH CABLE	QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with vari...
	FBG ID REFLECTOR	FBG ID Reflector FBG Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and...
	The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver	The100g optical transceiveris an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is...

All supplier products

Same products

	Coating Witness Samples	Seller: Changchun Long Ze Precision Optics Co., Ltd	Coating Witness Samplesis measurement of coating stresses on substrates. Often the material is th...
	Ball Lensed Fiber	Seller: SHENZHEN PHOTONSTREAM LIMITED	Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin...
	Angle Polished Lensed Fiber	Seller: SHENZHEN PHOTONSTREAM LIMITED	The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully...
	976nm 350W Fiber Coupled Laser Diode	Seller: SHENZHEN PHOTONSTREAM LIMITED	976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ...
	940nm Fiber Coupled Laser Diode	Seller: SHENZHEN PHOTONSTREAM LIMITED	940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ...