SFP+ 10G 850nm 300M LC Transceiver
The GHS1L0C85 850nm DFB 10Gigabit Transceiver is designed to transmit and receive serial optical data over single-mode optical fiber with 10Km.They are compliant with SFF-8431,SFF-8432, 10GFC Rev 4.0, FC-PI-4 Rev 7.0 and IEEE802.3ae 10GBASE-LR/LW. The transmitter converts serial CML electrical data into serial optical data compliant with the IEEE 802.3ae standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. When TX_DIS is asserted High, Transmitter is turned off. The receiver converts serial optical data into serial CML electrical data. An open collector compatible Loss of Signal is provided. The RX_LOS signal indicates insufficient optical power for reliable signal reception at the receiver. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Compatibility of SFP+ 10G 850nm 300M LCSRTransceiver
SFP-10G-SR10GBASE-SR SFP+ 850nm 300m
SFP-10G-SR-X10GBASE-SR SFP+ 850nm 300m
ONS-SC+_10G-SR10GBASE-SR SFP+
DS-SFP-10GE-SR10GBASE-SR SFP+ 850nm 300m
FET-10G10GBASE-SR SFP+ 850nm 300m
SFP-10G-LR-S10GBASE-LR SMF 1310nm 10km SFP+
XFP-10G-MM-SR10GBASE-SR MMF 850nm 300m SFP
Technical Specification Of SFP+ 10G 850nm 300M 10GLCTransceiver
Absolute Maximum Ratings
|
Parameter |
Symbol |
Typical |
Unit |
Notes |
||
|
Storage Temperature |
TS |
-40 |
- |
85 |
°C |
|
|
Supply Voltage |
VCC |
-0.3 |
- |
V |
||
|
Operating Relative Humidity |
RH |
0 |
- |
85 |
% |
no condensation |
Recommended Operating Conditions
|
Parameter |
Symbol |
Typical |
Unit |
Notes |
||
|
Operating Case Temperature |
TC |
0 |
- |
70 |
°C |
|
|
-40 |
- |
85 |
°C |
|||
|
Power Supply Voltage |
VCC |
V |
||||
|
Power Supply Current |
ICC |
- |
- |
250 |
MA |
|
|
Maximum Power Dissipation |
PD |
- |
- |
W |
||
|
Data Rate |
DRAVE |
- |
- |
Gb/s |
||
|
Transmission Distance |
TD |
- |
300 |
m |
Over MMF |
As a transceiver supplier, we can provide kinds of optical transceiverfor sale, if you are interested, please contact us.
Send product request
Other supplier products
 |
SFP 1.25G Tx1310/Rx1550 3Km LC Transceiver | Gearlink’s SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consi... |
 |
SFP 155M Tx1310/Rx1550 40Km LC Transceiver | The BIDI SFP transceivers are high-performance, cost-effective modules supporting dual data-rate of 155Mbps and 40km transmission distance with SMF... |
 |
QSFP 40G 850nm 300m MPO Transceiver | The Gearlink GLQ1M0C85 is a Four-Channel, Plug-gable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR,12G/10G/8G/4G/2G fiber cha... |
 |
40G QSFP+ Transceiver | 40G optical transceiver is packaged in sfp+ qsfp+. 40g qsfp+ transceiver has four independent full-duplex transmission and reception channels, and ... |
 |
SFP+ 10G 1310nm 10Km LC Transceiver | The GHS3L0C31 1310nm DFB 10Gigabit Transceiver is designed to transmit and receive serial optical data over single-mode optical fiber with 10Km.The... |
Same products
 |
Coating Witness Samples | Seller: Changchun Long Ze Precision Optics Co., Ltd | Coating Witness Samplesis measurement of coating stresses on substrates. Often the material is th... |
 |
Ball Lensed Fiber | Seller: SHENZHEN PHOTONSTREAM LIMITED | Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin... |
 |
Angle Polished Lensed Fiber | Seller: SHENZHEN PHOTONSTREAM LIMITED | The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully... |
 |
976nm 350W Fiber Coupled Laser Diode | Seller: SHENZHEN PHOTONSTREAM LIMITED | 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ... |
 |
940nm Fiber Coupled Laser Diode | Seller: SHENZHEN PHOTONSTREAM LIMITED | 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ... |
